A technical note on evaluating the effectiveness of bus rapid transit with transit signal priority

Transit Signal Priority (TSP) and Bus Rapid Transit (BRT) are innovative Intelligent Transportation System (ITS) tools that can reduce travel times for buses. Combining TSP and BRT can significantly improve bus travel, but can negatively impact network traffic operations. Although TSP has been implemented worldwide, few previous studies holistically examined the effects of using various conditional and unconditional TSP strategies with or without a BRT system. This research simulates multiple TSP and BRT combination scenarios to understand their impact on traffic operations, including crossing street traffic. A test bed along International Drive (I-Drive) in Orlando, Florida, was chosen as the simulation area. Field data collected for this test bed, which included traffic volumes, bus travel times, and traffic signal control data, were used to develop, calibrate, and validate the simulation model. Results showed that BRT with Conditional TSP 3 minutes behind significantly improved travel times, average speed, and average total delay per vehicle for the main through movements compared with no BRT or TSP, with only minor effects on crossing street delays. BRT with Unconditional TSP resulted in significant crossing street delays, especially at major intersections with high traffic demand, indicating that this scenario is impractical for implementation. The simulation suggests that BRT and TSP will be most effective when used in areas where crossing street volumes are low. However, it is unknown how these ITS tools affect pedestrian traffic. Using optimization methods can determine the best strategy to balance transit and pedestrian traffic.     

Satellite-Based Offshore Wind Energy Resource Mapping in Malaysia

Journal of Marine Science and Application - Development and application of offshore wind turbine farms have been increasing, particularly in the developed countries, because of their high power...     

Barriers for adoption of energy efficiency operational measures in shipping industry

According to the Third Greenhouse Gas (GHG) Study 2014 of International Maritime Organization (IMO), the total emission in 2012 are estimated to be 949 million tonnes which is 2.7% of global CO₂ emission by total shipping and expected to increase from 2012 levels by 50–250% by 2050. Significant changes are needed to all industry by implementation of energy efficiency design and operational measures to meet existing and future global emission reduction targets. Although the fuel cost-reducing effects of some energy efficiency measures and new technologies are well established and matured, shipping companies appear reluctant to adopt them. Besides, it is observed that the stakeholders are directly or indirectly involved for implementation of energy efficiency measures in shipping industry. Therefore, the objective for this study was to identify the barriers to energy efficiency operational measures by a qualitative survey among various stakeholders from all corners of shipping industry. It has been found in the research that the barriers for implementation of all cost-free operational measures are almost the same such as lack of information of the measure, lack of awareness and competence of ship crews and operation difficulties which are in nature of information and technical barriers. But financial issue and owner’s interest are the key barriers for some other operational measures which are related to costing and need investment for implementation.     

基于卫星的马来西亚近岸风能资源分布情况测绘研究（英文）

Development and application of offshore wind turbine farms have been increasing, particularly in the developed countries,because of their high power rating, high yield energy, high offshore wind, and unlimited space in the offshore. However, the poor data and simplistic methodologies of the previous assessments result in insufficient estimates of the wind energy potential.Thus, this study provides an assessment of the offshore wind energy resources in Malaysia using multi-mission satellite altimetry data. The satellite altimetry data was extracted from Radar Altimeter Database Systems located at GNSS and Geodynamics Laboratory, Universiti Teknologi Malaysia. The data were validated by buoy measurements from two offshore sites, as indicated by the high correlation coefficient of 0.88. Further, the offshore wind energy resource mapping data in Malaysia identified three areas in Peninsular Malaysia and Borneo as potential areas for offshore wind energy development.     

Decision fusion of a multi-sensing embedded system for occupant safety measures

The need for an embedded system that can fuse incomplete, inconsistent, and imprecise decisions from several sensing systems is a crucial step in achieving an effective decision for occupant safety measures. This paper deals with the decision fusion strategies of a multi-sensing embedded system to achieve significant enhancement in the reliability of occupant safety through the fused decisions. Multi-sensing approaches to determine weight, vision, and crash sensing are developed for occupant detection, classification, position calculation, and crash detection. A rule-based decision fusion algorithm is then developed to fuse the multi-sensing decisions. The developed sensing systems are incorporated into an embedded device. To execute the embedded system, a system interface between the software and hardware is developed using Lab Window/CVI with the C programming language. The experimental results demonstrated that the real time operation of the embedded system validate the effectiveness of the decision fusion algorithm, characterize the safety measures and monitor the decision application. Several events were tested that prove the performance of the embedded system is robust towards occupant safety measures.     

Use of diesel engine and surface-piercing propeller to achieve fuel savings for inshore fishing boats

Fishing is a major local industry in Malaysia, particularly in rural areas. However, the rapidly increasing price of fuel is seriously affecting the industry’s viability. At present, outboard petrol engines are the preferred choice for use in small-scale fishing boats because they deliver the advantages of high speed and low weight, they are easy to install, and they use minimal space. Petrol outboard engines are known to consume a greater amount of fuel than inboard diesel engines, but installing diesel engines with conventional submerged propellers in existing small-scale fishing boats is not economically viable because major hullform modifications and extra expenditure are required to achieve this. This study describes a proposal to enable reductions in fuel consumption by introducing the combined use of a diesel engine and surface-piercing propeller (SPP). An analysis of fuel consumption reduction is presented, together with an economic feasibility study. Resulting data reveal that the use of the proposed modifications would save 23.31 liters of fuel per trip (40.75 %) compared to outboard motors, equaling annual savings of RM 3962 per year.     

An expert system for air traffic flow management

An expert system for the air traffic flow management (ATFM) problem is presented. Two main prototypes have been constructed, one for timetable rescheduling that attempts to modify airline timetables to smooth traffic peaks at airports during rush-hours and another for centralized flow control that works to forecast the place, time and magnitude of the congestion and to propose mitigative actions. Simulations for the Brazilian ATFM, including the principal 14 airports, show the potential usefulness of the expert system.     

土耳其伊兹米特海湾大桥投标方案设计

伊兹米特海湾大桥主桥投标方案采用跨度为(650+1 550+650)m的3跨悬索桥,为双向6车道高速公路桥梁.主缆矢跨比为1/8.857;加劲梁采用钢箱梁,全宽38.4 m,梁高4.0 m;桥塔采用横向带有4道斜撑及2道水平横梁的钢塔,桥塔基础采用地基加固后的圆柱形预制钢混沉箱基础,沉箱中部设置支承塔柱的2根圆立柱;锚...     

Multi-Body Dynamics in Full-Vehicle Handling Analysis under Transient Manoeuvre

This paper presents a 94 degrees of freedom non-linear multi-body dynamics model of a vehicle comprising front and rear suspensions, steering system, road wheels, tyres and vehicle inertia. The model incorporates all sources of compliance: stiffness and damping, all with non-linear characteristics. The model is used for the purpose of vehicle handling analysis. A simulation run, pertaining to a double lane change is undertaken in-line with the ISO 3888 standard.