智能汽车专业校企合作模式及人才培养方式的探究

智能汽车已经成为未来汽车领域的发展方向,且高校逐渐与企业合作,建立智能汽车人才培养模式。但是现阶段,校企合作深度以及人才培养方式仍然存在一定的不足,不利于为智能汽车领域输送更多的人才。基于此,本文主要探究智能汽车专业校企合作模式以及人才培养模式,详细阐述智能汽车专业校企合作模式及人才培养模式中存在的问题,进而提出针对性的建议。     

先期振动对高聚物胶凝堆石料动变形特性的影响

先期振动对土石坝地震变形影响显著。通过开展不同先期动应力作用下的动三轴试验,研究了先期振动对未加固堆石料和高聚物胶凝堆石料动变形特性的影响。结果表明:先期振动对未加固堆石料和高聚物胶凝堆石料的弹性轴应变无明显影响,但显著降低了其塑性轴应变;未加固堆石料和高聚物胶凝堆石料的残余变形在先期振动影响下显著减小,与未经受先期振动的试样相比,先期动应力为40%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为48.1%和42.0%;先期动应力为80%围压的试样,最大残余剪应变降低幅度和最大残余体应变降低幅度的平均值分别为80.9%和71.6%。先期动应力幅值越大,再次经历动应力时未加固堆石料和高聚物胶凝堆石料产生的残余变形越小,抵抗变形能力提高越明显。最大残余变形的降低幅度与固结比、围压及高聚物含量无关。随后修正了沈珠江动残余变形模型,修正后的残余变形模型可以反映高聚物对堆石料残余剪应变和残余体应变的影响。与未经受先期振动的试样相比,先期动应力为40%围压的高聚物胶凝堆石料(高聚物质量比R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了27.7%和61.2%;先期动应力为80%围压的高聚物胶凝堆石料(R_p=2%)的改进残余变形模型参数c₁和c₄分别降低了68.8%和79.3%。     

西韩城际铁路湿陷性黄土地层现场浸水试验研究

在分析西韩城际铁路沿线黄土分布特征的基础上,选取代表性场地开展现场试坑浸水试验。试验结果表明:场地实测最大自重湿陷量为46 mm,仅为室内压缩试验计算值的0.23倍;湿陷土层厚度15 m,除Q;黄土全部具有湿陷性外,Q;上部黄土亦具有湿陷性;地表水自然入渗深度超过50 m,浸润角约为40°,浸润范围约为浸水试坑直径的1.7倍。对现场实测值和室内计算值差异原因进行深入分析,得出在黄土结构未完全破坏之前,发生过湿陷的土体在特定条件下还有可能再次湿陷的结论。     

广州地铁某型车转向架轴箱进水原因分析及解决措施

转向架轴箱轴承作为列车传动系统中的重要部件,其运行状态直接影响列车的运行安全。介绍了广州地铁某型车转向架轴箱轴承及接地装置多次出现进水导致轴承失效的情况,并深入分析得出轴箱进水的两个原因:轴箱端盖部件倒角尺寸异常,进口和国产的轴箱、接地装置间存在尺寸差异。提出了对轴箱端盖进行普查、更换、统型等解决措施。     

一种高铁CTC进路数据自动测试方法的设计与实现

调度集中系统与计算机联锁接口中的进路数据的测试存在工作量繁重、耗时长以及人为因素易出错等问题,针对该问题提出一种自动测试方法,可有效的解决进路数据的自动测试及测试结果的自动分析,多条高铁线路实践表明,能显著提高调度集中系统与计算机联锁接口的测试效率及数据正确率,使CTC系统产品更安全可靠。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.     

新机场管廊基坑邻近高速桥梁基础施工技术研究

新机场高速公路地下综合管廊大部分结构距在建新机场高速公路桥梁较近,基坑开挖过程易导致高速公路桥梁承台及桩侧土体外露,进而导致桥梁基础产生水平变位、不均匀沉降等现象,对高速公路后期运营产生极大的安全隐患。通过3组试验确定最优注浆参数,在管廊基坑开挖过程中对既有高速桥梁基础附近土体进行注浆加固,效果良好;通过对开挖过程中基坑、桥梁基础变形监测数据进行对比分析,对管廊基坑邻近桥梁基础开挖防护施工技术进行总结,为以后同类工程提供借鉴。     

内河船舶和国内海船CO2系统的异同分析

针对船舶现场检验中发现的固定式灭火系统的CO₂系统以及瓶头阀及其相关组件的各种缺陷,主要阐述内河船舶CO₂系统和国内海船CO₂系统的异同、瓶头阀的结构、释放总管的安装要求、泄放总管的安装要求、控制管路的安装要求,这也是验船师现场检验的难点,以期相关人员在遇到问题时了解如何处理。     

面向新型混合交通流的智能交叉口网络布局优化

考虑网联自动驾驶车辆(Connected Autonomous Vehicle, CAV)应用先进的车联网与自动驾驶技术，可以采用智能交叉口的组织形式，大幅提升交叉口的通行效率，为降低CAV与人工驾驶车辆(Human-driven Vehicle, HV)混行条件下城市交通系统的整体出行成本，提出智能交叉口在城 市交通网络中的布局优化问题，建立数学优化模型并求解。首先，基于对两类车辆行驶特性的分析，建立混合用户均衡模型，描述CAV与HV的路径选择行为；其次，从交通规划者的角度，以系统最优为目标，整合混合用户均衡模型，建立面向新型混合交通流的智能交叉口网络布局优化模型，并利用改进的遗传算法求解；最后，选取Sioux-Falls交通网络作为案例分析，验证模型与算法的有效性，并研究CAV渗透率变化对优化结果的影响。研究表明，智能交叉口在城市路网中的合理规划极大地提高了新型混行场景下城市交通系统的出行效率，同时，大幅降低了由于网联自动 驾驶单方面技术优势带来的CAV与HV的出行效率差距，增进了出行公平性。