共查询到20条相似文献,搜索用时 390 毫秒
1.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):507-528
In the first part of this study, the potential performance benefits of fluidically coupled passive suspensions were demonstrated through analyses of suspension properties, design flexibility and feasibility. In this second part of the study, the dynamic responses of a vehicle equipped with different configurations of fluidically coupled hydro-pneumatic suspension systems are investigated for more comprehensive assessments of the coupled suspension concepts. A generalised 14 degree-of-freedom nonlinear vehicle model is developed and validated to evaluate vehicle ride and handling dynamic responses and suspension anti-roll and anti-pitch characteristics under various road excitations and steering/braking manoeuvres. The dynamic responses of the vehicle model with the coupled suspension are compared with those of the unconnected suspensions to demonstrate the performance potential of the fluidic couplings. The dynamic responses together with the suspension properties suggest that the full-vehicle-coupled hydro-pneumatic suspension could offer considerable potential in realising enhanced ride and handling performance, as well as improved anti-roll and anti-pitch properties in a very flexible and energy-saving manner. 相似文献
2.
Hongbin Ren Sizhong Chen Gang Liu Lin Yang 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2016,54(2):168-190
This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles. 相似文献
3.
Rollover mitigation for a heavy commercial vehicle 总被引:1,自引:0,他引:1
Y. I. Ryu D. O. Kang S. J. Heo J. H. In 《International Journal of Automotive Technology》2010,11(2):283-287
A heavy commercial vehicle has a high probability of rollover because it is usually loaded heavily and thus has a high center
of gravity. An anti-roll bar is efficient for rollover mitigation, but it can cause poor ride comfort when the roll stiffness
is excessively high. Therefore, active roll control (ARC) systems have been developed to optimally control the roll state
of a vehicle while maintaining ride comfort. Previously developed ARC systems have some disadvantages, such as cost, complexity,
power consumption, and weight. In this study, an ARC-based rear air suspension for a heavy commercial vehicle, which does
not require additional power for control, was designed and manufactured. The rollover index-based vehicle rollover mitigation
control scheme was used for the ARC system. Multi-body dynamic models of the suspension subsystem and the full vehicle were
used to design the rear air suspension and the ARC system. The reference rollover index was tuned through lab tests. Field
tests, such as steady state cornering tests and step steer tests, demonstrated that the roll response characteristics in the
steady state and transient state were improved. 相似文献
4.
P. Karimi Eskandary A. Khajepour A. Wong M. Ansari 《International Journal of Automotive Technology》2016,17(5):807-816
Suspensions play a crucial role in vehicle comfort and handling. Different types of suspensions have been proposed to address essential comfort and handling requirements of vehicles. The conventional air suspension systems use a single flexible rubber airbag to transfer the chassis load to the wheels. In this type of air suspensions, the chassis height can be controlled by further inflating the airbag; however, the suspension stiffness is not controllable, and it depends on the airbag volume and chassis load. A recent development in a new air suspension includes two air chambers (rubber airbags), allowing independent ride height and stiffness tuning. In this air suspension system, stiffness and ride height of the vehicle can be simultaneously altered for different driving conditions by controlling the air pressure in the two air chambers. This allows the vehicle’s natural frequency and height to be adjusted according to the load and road conditions. This article discusses optimization of an air suspension design with ride height and stiffness tuning. An analytical formulation is developed to yield the optimum design of the new air suspension system. Experimental results verify the mathematical modeling and show the advantages of the new air suspension system. 相似文献
5.
6.
7.
8.
9.
10.
针对车辆减少能量消耗与提高抗侧倾能力需求,提出了一种主/被动可切换的液压互联悬架抗侧倾控制方法。基于9自由度车辆动力学模型,考虑蓄能器、液压缸、液压泵三者之间耦合的体积-流量-压力特性,建立液压互联悬架主动控制时域模型;结合"车身侧倾角-车身侧倾角速度"相平面法及车辆侧向加速度,得到车辆侧倾稳定域,并提出液压互联悬架系统侧倾稳定性控制介入与退出判据;在此基础上,采用Backstepping非线性控制算法设计主动液压互联抗侧倾控制器。最后,分析并改进侧倾稳定性评价指标,通过在MATLAB/Simulink环境下进行高速双移线、鱼钩试验等极端工况数值仿真,验证所提出的液压互联悬架主/被动切换控制系统能在减少能量消耗的情况下能否提高车辆抗侧翻的能力。研究结果表明:所提出的控制系统能有效提高车辆抗侧翻能力;当车辆侧倾状态超出设定的侧倾稳定区域介入线时,液压互联悬架系统由被动模式切换为主动抗侧倾模式,控制车辆侧倾状态回到稳定区域,以提高车辆侧倾稳定性;当判定车辆侧倾状态满足主动控制退出条件时,液压互联悬架系统回到被动模式,以减小能量消耗。 相似文献
11.
12.
13.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(10):1229-1252
The paper derives analytical solutions for the global optimum of the ride comfort and tyre grip performance measures for a quarter-car vehicle model optimised both individually and in combination. The solutions are derived for six simple suspension networks comprising one or two springs, one damper and possibly one inerter. The solutions are functions of four vehicle parameters: the sprung mass, the unsprung mass, the tyre stiffness and the static stiffness, of the suspension. 相似文献
14.
非线性汽车行驶平顺性模型的神经网络优化 总被引:16,自引:2,他引:16
本文运用离散生成随机路面输入的方法,在时城上对11自由度非线性整车行驶平顺性模型进行了分析研究,并在此 以径向基函数神经网络对悬架参数进行了优化计算。模型及算法合理准确,为汽车行驶平顺性的进一步研究提供了有价值的参考方法。 相似文献
15.
16.
17.
针对国产某微型轿车,在建立汽车悬架系统5自由度模型和时域路面模型基础上,对悬架系统的线性弹簧和非线性阻尼参数进行了优化。根据优化结果,对悬架系统的刚度和阻尼进行了匹配设计。经试验表明:座椅加速度自谱峰值减小7.4%,加速度均方根值减小19.4%,有效地改善了该车的行驶平顺性,证明时域优化方法对于悬架系统非线性参数优化是可行的。 相似文献
18.
19.
Malcolm C. Smith Stuart J. Swift 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2016,54(5):568-584
This paper studies the use of the least damping ratio among system poles as a performance metric in passive vehicle suspensions. Methods are developed which allow optimal solutions to be computed in terms of non-dimensional quantities in a quarter-car vehicle model. Solutions are provided in graphical form for convenient use across vehicle types. Three suspension arrangements are studied: the standard suspension involving a parallel spring and damper and two further suspension arrangements involving an inerter. The key parameters for the optimal solutions are the ratios of unsprung mass to sprung mass and suspension static stiffness to tyre vertical stiffness. A discussion is provided of performance trends in terms of the key parameters. A comparison is made with the optimisation of ride comfort and tyre grip metrics for various vehicle types. 相似文献
20.
P.J.Th. Venhovens A.C.M. Van Der Knaap H.B. Pacejka 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1993,22(5):359-381
The paper discusses the attitude and vibration control of a passenger car on the basis of a full vehicle model. The analysis presented consists of two parts: (I) The introduction of a newly developed semi-active anti-roll/pitch system, (ii) An example of an actively suspended full vehicle model using a simple control strategy to improve ride comfort. The attitude control using semi-actively generated compensation forces prevents the car from rolling in curves and pitching during braking or accelerating. The strength of the system is the small energy consumption. The performance of the combination of both attitude and vibration control can compete with a fully active suspension system. 相似文献