共查询到20条相似文献,搜索用时 531 毫秒
1.
针对具有非最小相不稳定内部动态的水下滑翔机运动控制问题,采用基于稳定逆技术的设计方法设计了前馈控制器。水下滑翔机在有限时间内的稳态间转换过程,被视作两点边值问题。将一种新型前馈控制器设计方法拓展,应用于非线性多输入多输出水下滑翔机系统;利用两点边值条件,为前馈控制器设计了期望输出轨迹。仿真结果表明,在设计的前馈控制器作用下,滑翔机内部动态的解,不仅是有界的,而且是因果的;通过选定合适的转换时间,可以满足滑翔机系统的输入输出限制,降低对控制输入激励的需求。 相似文献
2.
研究了水下滑翔机在单个运动周期下躲避障碍物的路径规划问题,针对水下滑翔机运动特点,采用改进的人工势场法,规划出避障路径。首先,对传统的人工势场法进行改进,以克服局部极值与目标不可达问题,并引入速度势场函数,将静态势场转变为动态势场;然后,将水下滑翔机的运动特性及约束考虑进来,提出障碍物影响半径确定方法;之后,分析了定常海流对路径规划的影响。最后,以HUST-2号水下滑翔机为例在不同情况下进行仿真试验。结果表明,所用方法能使水下滑翔机成功避开水中静态与动态障碍物。 相似文献
3.
水下滑翔机是一种新型的无推进装置的水下运载器,它是由净浮力来驱动的,同时通过内部的直线驱动器来改变重心的位置以实现姿态的调节。对于大多数水下滑翔机,浮力机构是通过改变自身排水体积来实现的,文中介绍了一种变重量的水下滑翔机的设计、动力学分析以及实验过程,该浮力调节机构主要由单向水泵和三位五通电磁阀组成,最大下潜深度为30米。文中介绍了水下滑翔机的运动方程和动力学特性,并且给出了在稳定时刻的解,并且通过计算流体力学的方法对水下滑翔机的水动力特性进行了分析。仿真和实验结果证明了该水下滑翔机的可靠性及实用性。 相似文献
4.
5.
6.
7.
《中国舰船研究》2016,(1)
无人水下滑翔机是一种高效的水下机器人。实尺度滑翔机在一般水池内很难形成稳态的滑翔运动,不便于研究分析其动力学问题,因此设计一种实验尺度的水下滑翔机,详述滑翔机的设计、建模、控制与试验研究。首先,简述实验尺度滑翔机结构,利用CFD软件计算壳体的水动力参数。然后,根据机体的内部质量分布,建立滑翔机的动力学模型。最后,设计垂直剖面运动的线性二次型调节器(LQR)控制器与线性Kalman观测器,并在观察环节加入一定量的白噪声干扰。仿真结果表明,设计的控制器与观测器可在一定量干扰存在的情况下保证机体的正常运行。水池试验的结果表明,设计的滑翔机可在3 m水深范围完成稳态滑翔运动,并具有良好的稳定性及操纵性。 相似文献
8.
[目的]针对水面无人艇(USV)的海上通信受限的问题,提出一种带有状态/输入量化的USV航向跟踪控制方法。[方法]基于反步法设计系统控制律,结合动态面技术降低虚拟控制律的计算量膨胀问题。对于控制系统中存在的不确定项及外界干扰,利用扩张状态观测器(ESO)进行估计。采用均匀量化器分别对控制系统中的状态变量和控制输入进行量化,且量化后的状态反馈信息仅用于跟踪控制。利用量化状态递归设计基于ESO的USV航向控制器,证明闭环控制系统中量化变量和非量化变量间误差的有界性。[结果]基于李雅普诺夫稳定性理论,提出了量化误差考量及闭环系统稳定性判定方法,严格证明了所设计的带有状态量化和输入量化的USV航向跟踪控制系统的稳定性,仿真实验验证了该控制策略的有效性。[结论]结果表明,所提方法可为USV航向跟踪控制提供借鉴。 相似文献
9.
10.
11.
水下滑翔器是广泛应用于海洋观测的新型浮力驱动设备。它通过改变重、浮力的比例实现垂直方向运动,通过固定水平翼以及改变浮心和重心的相对位置实现水平方向的运动。文章使用吉布斯函数和阿佩尔方程建立了水下滑翔器动力学模型并指导水下滑翔器设计。首先获得能够建立水下滑翔器动力学特性和内部各移动重物关系的模型。然后,使用计算流体力学软件Fluent获得模型中水动力参数的数值。考虑固定水平翼位置影响,文中以减小能量消耗为目标,给出水平翼的较优位置设计。最后,通过水下滑翔器模型水域试验数据和仿真的对比,证明了动力学模型和水下滑翔器设计的有效性。 相似文献
12.
相变材料作为温差能热机的工作流体,其热力学状态对周围海水温度非常敏感,且其融点对水下热滑翔机的运行范围影响很大.基于焓法模型,在不同大洋温度剖面下,对以3种相变材料为工作流体的温差能热机进行性能分析;并考虑到不同大洋温度剖面的特点,为温差能热机选择合适的相变材料,以拓宽水下热滑翔机的应用范围.结果表明:在给定的大洋温度剖面下,3种工作流体的相变过程时间不同;以正十五烷为温差能热机工作流体的水下热滑翔机具有更广的运行范围. 相似文献
13.
Mohammad Pourmahmood Aghababa Mohammad Hossein Amrollahi Mehdi Borjkhani Electrical 《船舶与海洋工程学报》2012,11(3):378-386
In this paper,an underwater vehicle was modeled with six dimensional nonlinear equations of motion,controlled by DC motors in all degrees of freedom.Near-optimal trajectories in an energetic environment for underwater vehicles were computed using a numerical solution of a nonlinear optimal control problem(NOCP).An energy performance index as a cost function,which should be minimized,was defined.The resulting problem was a two-point boundary value problem(TPBVP).A genetic algorithm(GA),particle swarm optimization(PSO),and ant colony optimization(ACO) algorithms were applied to solve the resulting TPBVP.Applying an Euler-Lagrange equation to the NOCP,a conjugate gradient penalty method was also adopted to solve the TPBVP.The problem of energetic environments,involving some energy sources,was discussed.Some near-optimal paths were found using a GA,PSO,and ACO algorithms.Finally,the problem of collision avoidance in an energetic environment was also taken into account. 相似文献
14.
Surasak Phoemsapthawee Marc Le Boulluec Jean-Marc Laurens Fran ois Deniset 《船舶与海洋工程学报》2013,12(1):112-121
Underwater gliders are recent innovative types of autonomous underwater vehicles (AUVs) used in ocean exploration and observation. They adjust their buoyancy to dive and to return to the ocean surface. During the change of altitude, they use the hydrodynamic forces developed by their wings to move forward. Their flights are controlled by changing the position of their centers of gravity and their buoyancy to adjust their trim and heel angles. For better flight control, the understanding of the hydrodynamic behavior and the flight mechanics of the underwater glider is necessary. A 6-DOF motion simulator is coupled with an unsteady potential flow model for this purpose. In some specific cases, the numerical study demonstrates that an inappropriate stabilizer dimension can cause counter-steering behavior. The simulator can be used to improve the automatic flight control. It can also be used for the hydrodynamic design optimization of the devices. 相似文献
15.
16.
S. Drücker D. Steglich L. Merckelbach A. Werner S. Bargmann 《Journal of Marine Science and Technology》2016,21(2):261-270
Underwater gliders, which are profiling autonomous underwater vehicles designed to make oceanographic measurements, are increasingly used in the coastal ocean. As they regularly surface for data transmission, gliders increasingly pose a risk for fast ships. In order to estimate the extent of damage due to collision, 3D finite element simulations of collisions between a glider and a high-speed craft with a glass-fiber reinforced plastic hull are performed. Different collision scenarios such as impact locations, angles of attack and speeds are examined. The results are compared to an analytical solution based on simplifying assumptions. Although both methods reveal consistent results, it is shown that finite element simulations are required to account for the 3D shape of the ship. The results indicate that at ship velocities exceeding 7.5 m/s (14.6 kt) the glider penetrates the ship’s hull causing severe damage to its structure. 相似文献
17.
水下滑翔机水动力外形研究综述 总被引:5,自引:0,他引:5
水下滑翔机是一种将传统的浮标技术与水下机器人技术相结合而研制成的新型自治水下机器人,具有作业时间长、航行距离大、建造和使用成本低等优点。水下滑翔机主要用于海洋环境长时间、大范围的实时监测,因此要求其具有优良的水动力性能。文章简要回顾了水下滑翔机的发展历程,重点介绍了其水动力外形方面的研究进展,并简要介绍了混合驱动和飞翼等概念在水下滑翔机上的应用研究,最后对水下滑翔机未来的发展趋势进行了展望。 相似文献
18.
19.