Steady Turning of Two-Wheeled Vehicles

When driving along a circular path, the driver of a motorcycle controls the vehicle mainly by means of steering torque. If low steering torque is necessary, the driver feels that the vehicle is manoeuvrable. In this paper, a mathematical model concerning steering torque is developed; it takes into account the actual kinematic behaviour of the vehicle and the properties of motorcycle tyres. Tyre forces act at the contact points of toroidal tyres, which are calculated according to kinematic analysis. Non-linear equations are solved using an iterative approach. Several numerical results are presented, and the influence of tyre properties and some geometrical and inertial properties of the vehicle on steering torque are discussed.     

Steady Turning of Two-Wheeled Vehicles

When driving along a circular path, the driver of a motorcycle controls the vehicle mainly by means of steering torque. If low steering torque is necessary, the driver feels that the vehicle is manoeuvrable. In this paper, a mathematical model concerning steering torque is developed; it takes into account the actual kinematic behaviour of the vehicle and the properties of motorcycle tyres. Tyre forces act at the contact points of toroidal tyres, which are calculated according to kinematic analysis. Non-linear equations are solved using an iterative approach. Several numerical results are presented, and the influence of tyre properties and some geometrical and inertial properties of the vehicle on steering torque are discussed.     

汽车的力学参数与稳态转向特性

本文以汽车力学参数试验台测出的数据为基础，为通过建立轮胎侧偏角，车厢侧倾角，回正力矩与侧向加速度之间的关系，运用最小二乘法对测试数据进行线性曲线拟合，找出了这些数据与汽车记转向特性之间的关系，并按国家标准ＧＢ／Ｔ３０４７－９１中的有关规定对被测试车辆的稳态转向特性进行了评价 。     

Influencing driver chosen cornering speed by means of modified steering feel

This paper presents an investigation about influencing the driver's behaviour intuitively by means of modified steering feel. For a rollover indication through haptic feedback a model was developed and tested that returned a warning to the driver about too high vehicle speed. This was realised by modifying the experienced steering wheel torque as a function of the lateral acceleration. The hypothesis for this work was that drivers of heavy vehicles will perform with more margin of safety to the rollover threshold if the steering feel is altered by means of decreased or additionally increased steering wheel torque at high lateral acceleration. Therefore, the model was implemented in a test truck with active steering with torque overlay and used for a track test. Thirty-three drivers took part in the investigation that showed, depending on the parameter setting, a significant decrease of lateral acceleration while cornering.     

Asymptotic sideslip angle and yaw rate decoupling control in four-wheel steering vehicles

This paper shows that, for a four-wheel steering vehicle, a proportional-integral (PI) active front steering control and a PI active rear steering control from the yaw rate error together with an additive feedforward reference signal for the vehicle sideslip angle can asymptotically decouple the lateral velocity and the yaw rate dynamics; that is the control can set arbitrary steady state values for lateral speed and yaw rate at any longitudinal speed. Moreover, the PI controls can suppress oscillatory behaviours by assigning real stable eigenvalues to a widely used linearised model of the vehicle steering dynamics for any value of longitudinal speed in understeering vehicles. In particular, the four PI control parameters are explicitly expressed in terms of the three real eigenvalues to be assigned. No lateral acceleration and no lateral speed measurements are required. The controlled system maintains the well-known advantages of both front and rear active steering controls: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres and improved manoeuvrability. In particular, zero lateral speed may be asymptotically achieved while controlling the yaw rate: in this case comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced. Also zero yaw rate can be asymptotically achieved: in this case additional stable manoeuvres are obtained in obstacle avoidance. Several simulations, including step references and moose tests, are carried out on a standard small SUV CarSim model to explore the robustness with respect to unmodelled effects such as combined lateral and longitudinal tyre forces, pitch, roll and driver dynamics. The simulations confirm the decoupling between the lateral velocity and the yaw rate and show the advantages obtained by the proposed control: reduced lateral speed or reduced yaw rate, suppressed oscillations and new stable manoeuvres.     

Dynamic analysis and control of an anti-lock brake system for a motorcycle with a camber angle

This paper analyses the dynamic response of a motorcycle with an anti-lock brake system (ABS) and camber or steering angle. Most studies have assumed that motorcycles brake in a straight line – that is, without a steering or camber angle. In this work, the performance of an ABS modulator is designed and analysed at first. Then, a controller is designed for motorcycle turning. The controller uses angular acceleration and the pressure value in brake calipers on the front and rear wheels, camber angle and lateral acceleration as commands to control brake pressure on each wheel to prevent wheel locking. The equation of motion for a motorcycle is based on Weir's equations. This motorcycle model combines a mathematical equation of the ABS modulator, tyre model and controller in simulations.     

A model of driver steering control incorporating the driver's sensing of steering torque

Steering feel, or steering torque feedback, is widely regarded as an important aspect of the handling quality of a vehicle. Despite this, there is little theoretical understanding of its role. This paper describes an initial attempt to model the role of steering torque feedback arising from lateral tyre forces. The path-following control of a nonlinear vehicle model is implemented using a time-varying model predictive controller. A series of Kalman filters are used to represent the driver's ability to generate estimates of the system states from noisy sensory measurements, including the steering torque. It is found that under constant road friction conditions, the steering torque feedback reduces path-following errors provided the friction is sufficiently high to prevent frequent saturation of the tyres. When the driver model is extended to allow identification of, and adaptation to, a varying friction condition, it is found that the steering torque assists in the accurate identification of the friction condition. The simulation results give insight into the role of steering torque feedback arising from lateral tyre forces. The paper concludes with recommendations for further work.     

Kinematics of a smart variable caster mechanism for a vehicle steerable wheel

The lateral force of a tyre is a function of the sideslip and camber angles. The camber angle can provide a significant effect on the stability of a vehicle by increasing or adjusting the required lateral force to keep the vehicle on the road. To control the camber angle and hence, the lateral force of each tyre, we can use the caster angle of the wheel. We introduce a possible variable and controllable caster angle ? in order to adjust the camber angle when the sideslip angle cannot be changed. As long as the left and right wheels are steering together according to a kinematic condition, such as Ackerman, the sideslip angle of the inner wheel cannot be increased independently to alter the reduced lateral force because of weight transfer and reduction of the normal load F _z . A variable caster mechanism can adjust the caster angle of the wheels to achieve their top capacity and maximise the lateral force, when needed. Such a system would potentially increase the safety, stability, and maneuverability of the vehicles. Using the screw theory, this paper will examine the kinematics of a variable caster and present the required mathematical equation to calculate the camber angle as a function of suspension mechanism parameters and other relevant variables. Having a steered wheel about a tilted steering axis will change the position and orientation of the wheel with respect to the body of the car. This paper provides the required kinematics of such a suspension and extracts the equations in special practical situations. The analysis is for an ideal situation in which we substitute the tyre with its equivalent disc at the tyre plane.     

An investigation on motor-driven power steering-based crosswind disturbance compensation for the reduction of driver steering effort

This paper describes a lateral disturbance compensation algorithm for an application to a motor-driven power steering (MDPS)-based driver assistant system. The lateral disturbance including wind force and lateral load transfer by bank angle reduces the driver's steering refinement and at the same time increases the possibility of an accident. A lateral disturbance compensation algorithm is designed to determine the motor overlay torque of an MDPS system for reducing the manoeuvreing effort of a human driver under lateral disturbance. Motor overlay torque for the compensation of driver's steering torque induced by the lateral disturbance consists of human torque feedback and feedforward torque. Vehicle–driver system dynamics have been investigated using a combined dynamic model which consists of a vehicle dynamic model, driver steering dynamic model and lateral disturbance model. The human torque feedback input has been designed via the investigation of the vehicle–driver system dynamics. Feedforward input torque is calculated to compensate additional tyre self-aligning torque from an estimated lateral disturbance. The proposed compensation algorithm has been implemented on a developed driver model which represents the driver's manoeuvreing characteristics under the lateral disturbance. The developed driver model has been validated with test data via a driving simulator in a crosswind condition. Human-in-the-loop simulations with a full-scale driving simulator on a virtual test track have been conducted to investigate the real-time performance of the proposed lateral disturbance compensation algorithm. It has been shown from simulation studies and human-in-the-loop simulation results that the driver's manoeuvreing effort and a lateral deviation of the vehicle under the lateral disturbance can be significantly reduced via the lateral disturbance compensation algorithm.     

Analysis of lateral tyre friction dynamics1

The tyre friction model is a key part of the overall multi-body tyre dynamics model. The LuGre dynamic tyre friction model is analytically linearised for pure cornering conditions. The linearised model parameters are conveniently expressed as functions of static curve slope parameters. The linearised lateral force and self-aligning torque submodels are described by equivalent mechanical systems. The linearised model and equivalent system parameters are analysed for different slip angle and wheel centre speed operating points. An example of the application of linearised tyre friction model to tyre vibration analysis is presented as well.     

A theoretical model of speed-dependent steering torque for rolling tyres

ABSTRACT

It is well known that the tyre steering torque is highly dependent on the tyre rolling speed. In limited cases, i.e. parking manoeuvre, the steering torque approaches the maximum. With the increasing tyre speed, the steering torque decreased rapidly. Accurate modelling of the speed-dependent behaviour for the tyre steering torque is a key factor to calibrate the electric power steering (EPS) system and tune the handling performance of vehicles. However, no satisfactory theoretical model can be found in the existing literature to explain this phenomenon. This paper proposes a new theoretical framework to model this important tyre behaviour, which includes three key factors: (1) tyre three-dimensional transient rolling kinematics with turn-slip; (2) dynamical force and moment generation; and (3) the mixed Lagrange–Euler method for contact deformation solving. A nonlinear finite-element code has been developed to implement the proposed approach. It can be found that the main mechanism for the speed-dependent steering torque is due to turn-slip-related kinematics. This paper provides a theory to explain the complex mechanism of the tyre steering torque generation, which helps to understand the speed-dependent tyre steering torque, tyre road feeling and EPS calibration.     

New approaches to enhance active steering system functionalities: preliminary results

An important development of the steering systems in general is active steering systems like active front steering and steer-by-wire systems. In this paper the current functional possibilities in application of active steering systems are explored. A new approach and additional functionalities are presented that can be implemented to the active steering systems without additional hardware such as new sensors and electronic control units. Commercial active steering systems are controlling the steering angle depending on the driving situation only. This paper introduce methods for enhancing active steering system functionalities depending not only on the driving situation but also vehicle parameters like vehicle mass, tyre and road condition. In this regard, adaptation of the steering ratio as a function of above mentioned vehicle parameters is presented with examples. With some selected vehicle parameter changes, the reduction of the undesired influences on vehicle dynamics of these parameter changes has been demonstrated theoretically with simulations and with real-time driving measurements.     

Study of the Pneumatic Tyre Behaviour on Dry and Rigid Road by Finite Element Method

The paper presents a physical tyre model capable of describing the complete pneumatic tyre behaviour during steady and transient states. Given the radial deflection, the longitudinal and lateral slip, the camber angle, the inner pressure and the mechanical parameters describing the tyre structure, the model returns the vertical load, the longitudinal and lateral forces, the self aligning torque. Particular attention has been devoted to the computation (by f.e.m.) of tyre carcass and tread deformations; it is explained how side force increases by moderate braking at constant slip angle. An experimental verification validates the model, although more studies could be needed to improve model effectiveness.     

String tyre model for evaluating steering agility performance using tyre cornering force and lateral static characteristics

The cornering force and lateral static characteristics of a tyre are fundamental factors that describe the steering feel for handling performance. However, it is difficult to justify the contribution of each factor when the tyre’s cornering motion is evaluated through subjective assessment. Currently, the relaxation length of Pacejka’s tyre model is close to describing these tyre motions. Therefore, this paper proposes a string tyre model based on the relaxation length in order to represent the steering performance. The proposed method provides a more accurate modelling of the steering agility performance. Therefore, it is possible to use this model to predict the steering response performance, and this is validated through comparison with a real relaxation length.     

Study of the Pneumatic Tyre Behaviour on Dry and Rigid Road by Finite Element Method

SUMMARY

The paper presents a physical tyre model capable of describing the complete pneumatic tyre behaviour during steady and transient states. Given the radial deflection, the longitudinal and lateral slip, the camber angle, the inner pressure and the mechanical parameters describing the tyre structure, the model returns the vertical load, the longitudinal and lateral forces, the self aligning torque. Particular attention has been devoted to the computation (by f.e.m.) of tyre carcass and tread deformations; it is explained how side force increases by moderate braking at constant slip angle. An experimental verification validates the model, although more studies could be needed to improve model effectiveness.     

The Influence of Structural Flexibilities on the Straight-running Stability of Motorcycles

A new tyre model for studies of motorcycle lateral dynamics, and three new motorcycle models, each incorporating a different form of structural compliance, are developed. The tyre model is based on “taut string” ideas, and includes consideration of tread width and longitudinal tread rubber distortion and tread mass effects, and normal load variation. Parameter values appropriate to a typical motorcycle tyre are employed. The motorcycle models are for small lateral perturbations from straight running at constant speed, and include (a) lateral compliance of the front wheel in the front forks, (b) torsional compliance of the front forks, and (c) torsional compliance in the rear frame at the steering head about an axis perpendicular to the steering axis.

Results in the form of eigenvalues, indicating modal damping properties and natural frequencies are presented for each model. The properties of four large production machines for a range of forward speeds, and the practicable range of stiffnesses are calculated, and the implications are discussed.

It is concluded that typical levels of structural compliance in models (a) and (c) contribute significantly to the steering behaviour properties of large motorcycles, and their observed behaviour can be understood better in terms of the new results than of those existing previously. Some conclusions relating to optimal structural stiffness properties are also drawn.     

Nonlinear PI front and rear steering control in four wheel steering vehicles

Vehicle steering dynamics show resonances, which depend on the longitudinal speed, unstable equilibrium points and limited stability regions depending on the constant steering wheel angle, longitudinal speed and car parameters.

The main contribution of this paper is to show that a combined decentralized proportional active front steering control and proportional-integral active rear steering control from the yaw rate tracking error can assign the eigenvalues of the linearised single track steering dynamics, without lateral speed measurements, using a standard single track car model with nonlinear tire characteristics and a non-linear first-order reference model for the yaw rate dynamics driven by the driver steering wheel input. By choosing a suitable nonlinear reference model it is shown that the responses to driver step inputs tend to zero (or reduced) lateral speed for any value of longitudinal speed: in this case the resulting controlled vehicle static gain from driver input to yaw rate differs from the uncontrolled one at higher speed. The closed loop system shows the advantages of both active front and rear steering control: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres, enlarged stability regions, reduced lateral speed and improved manoeuvrability; in addition comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced.

For the designed control law a robustness analysis is presented with respect to system failures, driver step inputs and critical car parameters such as mass, moment of inertia and front and rear cornering stiffness coefficients. Several simulations are carried out on a higher order experimentally validated nonlinear dynamical model to confirm the analysis and to explore the robustness with respect to unmodelled dynamics.     

Nonlinear PI front and rear steering control in four wheel steering vehicles

Vehicle steering dynamics show resonances, which depend on the longitudinal speed, unstable equilibrium points and limited stability regions depending on the constant steering wheel angle, longitudinal speed and car parameters.

The main contribution of this paper is to show that a combined decentralized proportional active front steering control and proportional-integral active rear steering control from the yaw rate tracking error can assign the eigenvalues of the linearised single track steering dynamics, without lateral speed measurements, using a standard single track car model with nonlinear tire characteristics and a non-linear first-order reference model for the yaw rate dynamics driven by the driver steering wheel input. By choosing a suitable nonlinear reference model it is shown that the responses to driver step inputs tend to zero (or reduced) lateral speed for any value of longitudinal speed: in this case the resulting controlled vehicle static gain from driver input to yaw rate differs from the uncontrolled one at higher speed. The closed loop system shows the advantages of both active front and rear steering control: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres, enlarged stability regions, reduced lateral speed and improved manoeuvrability; in addition comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced.

For the designed control law a robustness analysis is presented with respect to system failures, driver step inputs and critical car parameters such as mass, moment of inertia and front and rear cornering stiffness coefficients. Several simulations are carried out on a higher order experimentally validated nonlinear dynamical model to confirm the analysis and to explore the robustness with respect to unmodelled dynamics.     

左转圆曲线处避险车道流出角与引道设置

为了给设置于左转圆曲线处的避险车道流出角与引道长度设置提供参考，针对山区高速公路广泛采用的9.0 m宽制动床避险车道，考虑左转圆曲线半径和驶入速度的影响，进行了不同流出角度与引道长度的驾驶仿真试验研究。采用UC-win Road 9.0驾驶仿真平台，获取了不同场景下16名男性B照驾驶人由主线驶入紧急避险车道过程中的车辆运行特征数据。采用拟合回归的方法，分析了圆曲线半径和驶入速度对方向调整时间、最小转向半径、方向盘转角幅值、方向盘转角频率的影响，建立了各指标与圆曲线半径的定量回归关系模型，并对比了主线为直线时的试验结果。采用二阶聚类的方法对不同圆曲线半径条件下的引道与流出角度的设置水平进行分类，获取了适宜设置避险车道的初步条件。根据车辆的行驶稳定性，确定了左转圆曲线处避险车道流出角与引道的设计标准。研究结果表明：左转圆曲线处避险车道的流出角受圆曲线半径的影响，引道长度受圆曲线半径与驶入速度的影响；主线半径1 000 m及以上，流出角0°~5°，引道为6 s设计行程，流出角5°~10°，引道为9 s设计行程；条件困难时，紧急避险车道可设置于半径600~1 000 m的曲线处，流出角0°~5°，引道为9 s设计行程，流出角5°~15°，引道为12 s设计行程。     

A path-following driver–vehicle model with neuromuscular dynamics,including measured and simulated responses to a step in steering angle overlay

An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances.