共查询到20条相似文献,搜索用时 140 毫秒
1.
《船舶标准化工程师》2009,(1):45-48
船舶系统
船舶系统 ship system
船舶上的舱底和压载系统、甲板排水及疏水系统、空气测深注入系统、生活用水和供暖系统、灭火系统、生活污水系统、冷藏与制冷系统、空调和通风系统的统称 相似文献
2.
3.
4.
海洋覆盖了地球表面的71%,是全球生命支持系统的一个基本组成部分,也是资源的宝库,环境的重要调节器,人类社会的发展必然会越来越多地依赖海洋.而航标对海洋经济和航运事业的发展、海洋环境的保护、国防建设和国家主权的捍卫都起着重要的作用,如何满足航海者需求,创造更加安全、畅通、高效的助航保障环境,让航海者在任何时候、任何地点均可享受到全面、及时、可靠、优质的助航服务,到2020年基本建成全方位覆盖、全天候运行、快速反应的现代化水上交通安全保障体系,是航海保障工作的努力宗旨,也是我们建立综合助航体系的目的.本文主要就AIS系统、DGPS系统、视频监控系统、航标遥测遥控系统、港域环境监测系统等可融入综合助航体系的子系统做论述,由于水平所限,不当之处,敬请指正. 相似文献
5.
6.
本文介绍了热交换器在舰船动力装置系统、生活系统以及节能系统中的应用,以及不同应用场合下的热交换器的构造、特点和选型。 相似文献
7.
论文在归纳总结舰艇发电机组数学模型和基本原理的基础上,应用Matlab/Simulink仿真软件,搭建了舰艇发电机组的仿真模型,包括柴油机、调速系统、同步电机、励磁系统及静态负载的模型.舰艇发电机组中的柴油机调速系统和励磁控制系统是相互耦合,论文建立的仿真模型对这两个变量进行协调控制.在此基础上对模型的静态、动态稳定性方面做了研究.仿真结果表明所建模型基本符合GJB要求.该模型可为舰艇发电机组系统的深入研究提供借鉴. 相似文献
8.
9.
10.
船用惯性导航系统乃是利用加速仪探测船舶的加速度,而加速度的产生系依牛顿运动定律-物体受外力作用后产生加速度之结果.并将所探测得到的加速度对时间积分,则可进一步得到速度与位移,若开始点的相关位置已知,则可获得船舶即时的推算位置.惯性导航系统乃一种本身能完全独立操作的自备式航仪,其特点是不受天候的影响及地理环境的限制,并且能提供所有的导航资料:包括船位置、船速、船姿态(纵摇、摇摆和旁摆之角度)等,其功能远比其它导航系统要好,为一准确度及可靠度均极佳之定位导航仪,是现有导航仪中唯一真正世界性航仪.文中讨论了惯性导航系统的机械元件部分,并且详述其操作程序、操作模式及系统的动力模型.加速仪与其他系统的机械元件的性能将依其中之可调增益而改变,文中探讨了其系统响应的性能设计.最后用电脑模拟来验证文中所提出的系统模型及相关控制装置的可靠性. 相似文献
11.
实际海浪环境中舰船大尺度模型试验研究进展 总被引:1,自引:0,他引:1
目前对舰船总体性能的研究主要是依靠数值计算、水池模型试验、实际海浪环境大尺度模型试验以及实船海试等方法,以上各种方法均有一定的适用范围.实际海浪环境中舰船大尺度模型试验技术是采用适当缩尺比的自航船模在自然水域环境中进行的试验,可以研究舰船在开阔海域自由航行状态下的各项航行性能.分析各种舰船总体性能研究方法的优缺点,针对目前舰船总体性能理论与试验研究存在的问题分析开展舰船大尺度模型海上试验研究的必要性,综述国内外大尺度模型试验技术的发展现状,最后针对该试验技术中的关键技术及热点问题进行总结与展望. 相似文献
12.
Kristjan Tabri Jukka Määttänen Janne Ranta 《Journal of Marine Science and Technology》2008,13(1):71-84
This study was initiated due to the lack of experimental data on ship collisions. The feasibility of model-scale ship collision
experiments was examined and a series of model-scale ship collision experiments is presented. The theoretical background for
the analysis of experiments is given together with the principles of scaling. Proper scaling should assure physical similarity
to the large-scale experiments conducted in the Netherlands. The Froude scaling law was followed, resulting in the improper
scaling of some forces: the effects of this are discussed. The study concentrates on the dynamics of collisions. The structural
response, properly scaled from the large-scale experiments, was modelled using polyurethane foam as the ship’s side structure.
The collision process was analysed and the results of model-scale tests, large-scale experiments, and a simple analytical
model were compared, showing that there was both quantitative and qualitative agreement in the results of the experiments
conducted at different scales. The analytical model yielded good quantitative assessment of the deformation energy. 相似文献
13.
Vishwanath Nagarajan Dong-Hoon Kang Kazuhiko Hasegawa Kenjiro Nabeshima Toshihiko Arii 《Journal of Marine Science and Technology》2009,14(3):296-309
The influence of a rudder’s axial force on the prediction of full-scale powering performance of a ship is investigated in
this paper. Axial force characteristics of different rudder types were investigated by open water experiments. Viscous scale
effects on the rudder’s axial force were investigated by carrying out open water experiments with different sizes of rudder.
Experiments were carried out in the towing tank for a model ship fitted with different rudder systems to investigate the influence
of rudder’s axial force on full-scale propulsion performance prediction. Based on the experiment results, a new prediction
method is proposed for estimating full-scale power that considers scale effect on rudder’s axial force. Good performance of
the proposed prediction method is demonstrated by estimating the engine power of a ship installed with a special high lift
twin-rudder system from model experiments and comparing it with the values measured on the ship during full-scale experiments. 相似文献
14.
船舶在波浪中航行时的纵向运动性能是衡量船舶综合航行性能的重要指标.为了改善船舶在波浪中的纵向运动性能,本文基于首部减摇组合附体技术对某型船首部构型进行改造并通过水池模型试验对其静水阻力和耐波性进行了分析研究.在分析该船作业及航区特点的基础上,通过船首部线型改造及减纵摇组合附体构型优化,给出适用于该船的首部构型方案.应用CFD软件和修正切片法进行水动力性能分析,并对船首构型方案进行优选.将优选出的性能较优复合船型方案和原船型开展水池模型静水阻力与耐波性对比试验分析,验证减摇复合船型的静水阻力性能与耐波性能.试验结果表明,改造后的复合船型减纵摇效果明显,对应实船四级海况18节航速下纵摇与首部加速度有义值较原船型降低15%以上;复合船型静水阻力有所增加,实船18节航速下静水阻力增加13.5%. 相似文献
15.
[目的]针对“适配于螺旋桨的船尾线型+泵喷推进器”构成的船舶泵喷推进系统,提出一种基于统计学习的实船快速性预报新方法。[方法]以某大型水面船舶泵喷推进系统为对象,通过神经网络学习典型推进泵的推力系数图谱曲线,综合运用船-桨配合时的K_(T)-J曲线和船体-喷泵配合时的推力特性曲线,建立“仅需船舶阻力曲线就能实现船舶泵喷推进系统实船快速性预报”的新方法,并基于船模阻力试验、泵喷模型敞水试验及船体-泵喷自航试验的测量换算结果对实船推进性能的预报结果开展精度校验。[结果]校验结果表明:在航速18~30 kn范围内,船舶泵喷推进系统的自航转速、推力和功率的预报误差可控制在5.4%以内,其中设计航速附近的误差甚至小于2%;船体-泵喷的相互作用程度介于船-桨与船体-喷泵之间且幅值相对较小,推力减额系数为趋向于0的极小值,故船舶泵喷推进系统是介于桨轴推进系统和喷水推进系统之间的产物。[结论]该预报方法有利于提升船舶泵喷推进系统实船快速性预报的能力,可为新型舰艇泵类推进系统总体设计/研究提供参考。 相似文献
16.
17.
航行船舶在波浪中响应长期监测技术 总被引:1,自引:1,他引:0
船舶在运营中遭遇恶劣海况时结构可能会发生破坏,从而对船舶在海上航行的安全性产生严重影响.对航行船舶结构安全性的实时监测与评估是船舶设计研究人员非常关注的问题,它对船体结构的研究、设计和标准制定以及航行操作都有重要的意义.对研发成功的一套航行船舶在波浪中响应的长期监测系统(LOTEMS)及其在实船航行中的长期应用情况进行介绍和分析.该系统能对船体结构的总纵强度和局部强度、船舶6个自由度的运动模态以及船舶的加速度进行实时的跟踪测量和分析,可为船舶结构安全状态提供必要的警示信息,以便为船舶操作人员航行决策提供辅助依据. 相似文献
18.
Wave-induced vertical bending moment (VBM) and horizontal bending moment (HBM) on a large-scale segmented model with a box-type backbone beam in short-crested irregular seas are systematically analyzed using sea trial measurement data. New insights into the relationship between nonlinear VBM and HBM of the ship sailing in short-crested sea waves are explored and presented. The results indicate that the HBM significantly contributes to the total sectional loads when the ship is sailing in a seaway and the HBM has a strong correlation with VBM in both magnitude and tendency. Therefore, design loads of HBM and the corresponding lateral structural strength issues should also be concerned in addition to VBM at the ship design phase. 相似文献
19.
[目的]为了实现舰船蒸汽动力系统的数字化、网络化和智能化,提出一种总体数字孪生模型应用体系。[方法]从物理对象、过程要素、生命周期及虚拟空间这4个维度,提出基于数字孪生的舰船蒸汽动力系统总体“四维思想模型”,并创建总体全生命周期的“五阶体系模型”,涵盖概念论证、系统设计、总装建造、试验试航及运维保障这5个典型的阶段。通过引入大数据、物联网、云计算、人工智能和基于模型的系统工程等先进技术,形成由物理层、接口层、数据层、模型层、调度层、功能层及应用层组成的舰船蒸汽动力系统总体数字孪生“7层架构模型”。[结果]舰船蒸汽动力系统虚拟设计分析及试验平台的验证结果表明,数字孪生体系框架可以有效支撑系统方案设计、操作运行分析及试验方案评估,从而实现舰船全生命周期中物理空间与虚拟空间的交互协同。[结论]研究成果可为舰船蒸汽动力系统的总体数字化设计提供参考。 相似文献
20.
To consider the resistance component due to hull geometry, the International Towing Tank Conference (ITTC) adopted the resistance
test method in 1978, introducing the form factor concept with two basic assumptions, i.e., the form factor of a model ship
is the same as that of a full-scale ship and the form factor is independent of ship speed. However, it is not only very difficult
to determine the form factor using the ITTC ’78 method, but also there have been questions regarding the basic assumptions.
Therefore, the authors carried out three basic studies on the form factor concept and proposed a new extrapolation procedure
for the prediction of full-scale ship resistance performance. The validity of the proposed procedure is being investigated
by comparing sea trial and model test results. The results of this investigation will be presented in the near future. 相似文献