四轮转向汽车操纵稳定性研究

为了研究转向工况对四轮转向汽车操纵稳定性的影响,基于Matlab/Simulink建立四轮转向汽车前轮转角比例前馈加横摆角速度模糊PID反馈控制模型,通过与Trucksim车辆模型和Simulink控制模型联合仿真,分别在低速和中高速下进行方向盘角阶跃输入离线仿真和方向盘正弦角输入实时仿真试验,与前轮转向汽车在相同工况下侧向加速度、横摆角速度以及质心侧偏角的仿真结果进行对比分析。试验结果表明:四轮转向控制仿真结果优于前轮转向结果,搭建的四轮转向前轮转角比例前馈加横摆角速度模糊PID反馈控制策略,能提高汽车低速转向时的操纵轻便性和机动性以及中高速转向时的操纵稳定性。     

Labview应用程序开发中使用支持文件相对路径的有关问题

用Labview开发涉及支持文件读写的应用程序时,常会出现调试正常而可执行文件运行时找不到支持文件路径的错误。基于一简单示例,分析了产生此问题的原因并提供了解决问题的思路。     

载货汽车主气瓶不同气压时制动性能分析

汽车综合性能测试仪VGQT测试分析结果表明,货车在主制动气瓶压力不同时,各轴制动气室所能达到的最大压力也不相同[1],除此之外,本试验中N类载货汽车0型制动试验表明,主气瓶气压不同时,各轴气室制动压力变化曲线以及有效最大减速度MFDD也不相同。载货汽车绝大部分是用于长途运输,尤其是N2、N3类载货汽车,由于其满载质量大,长途运输中制动效能对于行驶安全性有着很大的影响,尤其在我国西南部山道纵横,长时间上下坡很容易造成制动器的热衰退,这是引起交通事故的主要诱因之一[2,3]。本文以实际试验结果为研究对象,分析了主气瓶在不同压力下各轴制动气室压力的变化以及0型制动试验中制动气压曲线的变化和有效最大减速度的变化,这对于行驶安全性和燃油经济性都有一定的意义,进而对排放和环境造成影响。     

Adapting without Retreating: Responses to Shoreline Change on an Inlet-Associated Coastal Beach

Coastal barrier systems around the world are experiencing higher rates of flooding and shoreline erosion. Property owners on barriers have made significant financial investments in physical protections that shield their nearby properties from these hazards, constituting a type of adaptation to shoreline change. Factors that contribute to adaptation on Plum Island, a developed beach and dune system on the North Shore of Massachusetts, are investigated here. Plum Island experiences patterns of shoreline change that may be representative of many inlet-associated beaches, encompassing an equivocal and dynamically shifting mix of erosion and accretion. In the face of episodic floods and fleeting erosive events, and driven by a combination of strong northeast storms and cycles of erosion and accretion, the value of the average Plum Island residence increases by 34% for properties on the oceanfront where protection comprises a publicly constructed soft structure. Even in the face of state policies that ostensibly discourage physical protection as a means of adaptation, coastal communities face significant political and financial pressures to maintain existing protective structures or to allow contiguous groups of property owners to build new ones through collective action. These factors mitigate against adapting to shoreline change by retreating from the coast, thereby potentially increasing the adverse effects of coastal hazards.     

不锈钢车体钝化工艺研究

针对轨道交通车辆在制造过程中,不锈钢车体表面的钝化膜因机加工、焊接等因素可能遭到破坏,导致不锈钢车体防腐能力下降的情况,详细介绍了不锈钢车体的钝化原理、钝化工艺及钝化效果的检测方法。经过柠檬酸钝化液钝化处理后,可有效去除车体表面游离铁和其他杂质,车体表面颜色均匀一致,提高了不锈钢车体的耐蚀性和美观性。     

东营港广利港区航道工程潮流场及泥沙骤淤数值模拟

防波堤和航道工程对工程海域潮流场的影响和大风浪条件下航道骤淤是东营港广利港区工程建设中的关键问题。根据搜集的资料和工程区域水文测验数据，对水动力条件、泥沙特征及岸滩演变规律进行分析研究。建立了包含潮汐和泥沙单元的数值模型，用于模拟工程施工对潮流场的影响，并计算了大风浪条件下的骤淤分布规律。结果表明：东营港广利港区具有往复流运动的不正规半日潮流特征。项目建设对口门区域的潮流场影响最大，以大潮为例，涨急、落急流速最大增幅为0.32 m/s和0.16 m/s。10 a一遇风浪条件影响下，口门附近淤强可达0.5 m以上，最大可达到1.02 m。     

两种跨平台航迹精度测评方法研究

跨平台航迹精度测评对多平台协同使用传感器航迹数据具有指导意义,论文介绍了相对于本平台距离/方位的测评方法(方法一)和空间距离精度的测评方法(方法二),从非线性坐标变换的角度分析了本平台位置对测评结果的影响,其中方法一的计算结果在两平台位置相差不大的情况下主要受被探测目标相对于这两个平台的方位角度差影响,方法二的计算结果则不受本平台位置的影响,因而后者更有意义。     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

Integrated approach to an optimal automotive timing chain system design

Ensuring engine efficiency is a crucial issue for automotive manufacturers. Several manufacturers focus on reducing the time taken to develop and introduce brand new vehicles to the market. Thus, a synergic approach including various simulations is generally adopted to achieve a development schedule and to reduce the cost of physical tests. This study involved proposing a design process that is very useful in the preliminary development stage through effective support from simulations. This type of simulation-based design process is effective in developing timing chain drives; the use of this process, based on results from multiple trials, showed improvements in performance including low friction and vibration, improved durability, and cost-effective part design when compared to conventional processes. This study proposes an integrated approach to the preliminary design of an automotive timing chain system. The approach involves structural and dynamic analyses. The details of the design process are described by using the case of a virtual engine. This study conducted and summarized a dynamic and structural analysis as well as topological optimization to describe a process to obtain optimal results. The results of this study indicated the following improvements in overall performance factors: 12.1 % improvement in transmission error, 10.1 % reduction in chain tension, 46 % reduction in tensioner arm weight, and 11 % reduction in transversal displacement.     

掺锶磷酸钙骨水泥的体外细胞生物学性能评价及其与掺锶量的相关性

目的 评价"SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的生物相容性及其与掺锶量的关系.方法 通过急性全身毒性、热原性、溶血性、体外细胞毒性以及成骨细胞在材料表面的黏附、增殖与表达等实验,检测材料的性能及生物降解潜能.结果 "SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的急性全身毒性、热原性、溶血性、体外细胞毒性均为合格.Sr-CPC的热原性、溶血性以及碱性磷酸酶值与掺锶量呈非线性关系.结论 含锶磷酸钙骨水泥体外细胞生物相容性良好,是安全的新型骨组织工程支架材料.