Enabling a viable technique for the optimization of LNG carrier cargo operations

In this study, we optimize the loading and discharging operations of the Liquefied Natural Gas (LNG) carrier. First, we identify the required precautions for LNG carrier cargo operations. Next, we prioritize these precautions using the analytic hierarchy process (AHP) and experts’ judgments, in order to optimize the operational loading and discharging exercises of the LNG carrier, prevent system failure and human error, and reduce the risk of marine accidents. Thus, the objective of our study is to increase the level of safety during cargo operations.     

Oriented review to potential simulator for faults modeling in diesel engine

This paper presents a literature review on most of the faults and their models that are considered on a diesel engine. Several faults that may be produced on diesel engine have been analyzed, classified, modeled, and their influences on the global system have been shown. Thus, this paper aims to prepare an important data base on diesel engine faults which may help researchers to develop precise strategies on diesel engine fault diagnosis and prognosis, and also it helps in the development of diesel engine simulators aiming to study the behavior of the diesel engine in the presence of faults. Different fault models such as analytical, empirical, degradation models which may be represented as function of time or as function of the number of cycles, data driven models such as neural network models, or simply constant are presented and analyzed. The global overall models for diesel engine integrating faults are expressed. And finally, the use of these models with the most common failure density distribution functions is proposed giving a more realistic approach to our study.     

Advantages of twin rudder system with asymmetric wing section aside a propeller

This study presents a new twin rudder system with asymmetric wing section, aside a propeller, as a new category energy saving device (ESD) for ships. The energy saving principle of the new ESD, which is called “Gate rudder”, is described and its applicability on a large bulk carrier is explored using experimental and numerical methods. The study makes emphasis on the cost-effectiveness of the proposed ESD and presents a potential energy saving up to 7–8 % with the new device as well as an attractive return investment in 0.37–0.9 year. These estimations are based on the conventional powering methods, whereas the accuracy of the ESD design method is confirmed by model test measurements.     

Application of digital image correlation method to in-situ dynamic strain measurement

Application of digital image correlation (DIC) method to determination of in-situ dynamic strain is presented in this study. Firstly, an integrative software is programmed based on the DIC algorithms and point-wise least-squares fitting technique. Then, simulated speckle images are generated to study the computational accuracy of this software. The experimental setup and procedures for measuring in-situ dynamic strain through both DIC and strain gauge are proposed. The DIC results are close to those measured by strain gauge. This fact reveals that DIC is a practical and effective tool for in-situ dynamic strain measurement. Finally, the full-field in-situ dynamic strain of another specimen is measured by DIC, and the overall distribution of the strain in the measurement area is clearly shown.     

CT reconstruction with priori MRI images through multi-group datasets expansion

Computed tomography (CT) reconstruction with a well-registered priori magnetic resonance imaging (MRI) image can improve reconstruction results with low-dose CT, because well-registered CT and MRI images have similar structures. However, in clinical settings, the CT image of patients does not always match the priori MRI image because of breathing and movement of patients during CT scanning. To improve the image quality in this case, multi-group datasets expansion is proposed in this paper. In our method, multi-group CT-MRI datasets are formed by expanding CT-MRI datasets. These expanded datasets can also be used by most existing CT-MRI algorithms and improve the reconstructed image quality when the CT image of a patient is not registered with the priori MRI image. In the experiments, we evaluate the performance of the algorithm by using multi-group CT-MRI datasets in several unregistered situations. Experiments show that when the CT and priori MRI images are not registered, the reconstruction results of using multi-group dataset expansion are better than those obtained without using the expansion.     

Gain and noise figure analysis of Er<Superscript>3+</Superscript>-doped YAG transparent ceramic microchip amplifier

The rate equations and the power evolution equations based on excited state absorption (ESA) and cooperative upconversion (CUC) of high concentration erbium-doped yttrium aluminum garnet (YAG) transparent ceramic waveguide amplifier are set up to analyze the effects of the pump power, active ion concentration and waveguide length on the amplifier gain and noise figure (NF). The numerical analysis predicts that with a pump power of 100mW, an active ion concentration of 1.0×10²⁶ ion/m³ and a waveguide length of 3 cm, a small-signal gain of 30 dB and an NF of 5 dB can be achieved in the micro-chip amplifier.     

Uncertainty analysis of value for money assessment for public-private partnership projects

In recent years, private sectors are encouraged to take an active part in franchising of urban infrastructure investments and operations, which promotes the rapid development of public-private partnership (PPP) in infrastructure and public service supply. Value for money (VFM) assessment has been officially proposed to provide a reference for selection of projects planning to adopt PPP. Based on the bottlenecks of VFM application in China and the uncertainties for urban infrastructure PPP projects, a discounted cash flow (DCF) model is established for VFM of infrastructure PPP projects. Then, a Monte Carlo simulation model is established on the basis of uncertainty factors for VFM. Through the analysis of Huai’an trams PPP project, coping strategies of uncertainties for VFM are put forward. Findings of the research may propel the establishment of a complete VFM evaluation system for PPP projects. Key instructional functions of VFM during the process of decision-making can be brought into full play and PPP may develop orderly.     

Geometric calibration algorithm of polarization camera using planar patterns

Polarization pattern provides additional information besides spectral signatures. It can be used in many applications, such as navigation, defect detection and object identification. A novel polarization camera composed of four synchronized cameras is proposed, and it can realize real-time polarization measurement. This study particularly concentrates on the geometric calibration of the system. The projection model is analyzed and the multi-camera calibration algorithm is proposed. Firstly, each camera is calibrated separately using planar patterns, and then the geometric calibration algorithms are performed. Due to the geometrical constraint, a global optimization method results in smaller estimation uncertainties. A mean rotation error of 0.025° and a mean translation error of 0.26mm are achieved after geometric calibration. The images are rectified to establish a correspondence among cameras and are combined to acquire the polarization measurement. The polarization pattern of the skylight is measured by the system and the results are consistent with the previous studies.     

Seafarers’ perceptions of competency in risk assessment and management: an empirical study

Past analysis of accident investigations suggest an absence of or inadequate practices of risk assessment and management on board vessels. Although the International Management Code for the Safe Operation of Ships and for Pollution Prevention (ISM Code) requires that the risk management process must not only be correctly formulated and implemented but also be periodically evaluated in order to verify that these objectives are attained, the correct and effective implementation and application of the process cannot be achieved without active involvement of competent seafarers on board. Due to the limited investigation of seafarers’ competencies in risk management, the reasons for the inadequacies in the process that are leading to accidents were not evident. Hence, using a survey, this paper conducted a pilot study investigating seafarers’ perceptions of competency in the various components of the risk management process conducted on board vessels. The findings of this paper suggest an overall satisfaction with the risk assessment process. However, there is certainly room for improvement as far as seafarers’ performance is concerned. The findings of this paper provided valuable insights into the current training regimes in the area of risk assessment and management paving the way towards enhanced safety procedures on board vessels.     

Automatic outer surface extraction of femoral head in CT images

Computer-aided hip surgery planning and implant design applications require accurate segmentation of femoral head and proximal acetabulum. An accurate outer surface extraction of femoral head using marching cubes algorithm remains challenging due to deformed shapes and extremely narrow inter-bone regions. In this paper, we present an automatic and fast approach for segmentation of femoral head and proximal acetabulum which leads to accurate and compact representation of femoral head using marching cubes algorithm. At first, valley-emphasized images are constructed from original images so that valleys stand out in high relief. Otsu’s multiple thresholding technique is applied to seperate the images into bone and non-bone classes. Region growing method and threedimensional (3D) morphological operations are performed to fill holes in the bone. In the reclassification process, the bone regions are further segmented, and the boundaries of the bone regions are further refined based on Bayes decision rule. Finally, marching cubes algorithm is applied to reconstruct a 3D model and extract the outer surface of femoral head and proximal acetabulum. Experimental results show that this method is an accurate segmentation technique for femoral head and proximal acetabulum and it can be applied as a tool in medical practice.