海淀区道路交通管理规划

在调查、分析北京市海淀区道路交通管理现状及其存在问题的基础上,依据海淀区的社会经济发展、交通等规划资料,分析预测海淀区交通管理的发展趋势,研究海淀区道路交通管理规划的内容,为海淀区道路交通管理规划奠定基础。     

鱼雷作战仿真系统中鱼雷联邦成员的设计

针对鱼雷武器作战分布交互仿真的需求，给出了鱼雷节点框架的设计思路和实现方法，实现了模型、接口、界面的分离，增强了鱼雷武器模型的可扩展性和可重构性；开发出鱼雷武器模型的基础类库和相关数据库，从而有利于用户对鱼雷模型的修改和维护。运行结果表明，经过上述改造的仿真系统运行稳定，为工程研制人员提供了友好的仿真软件。     

高速列车摩擦制动模拟试验研究

根据相似准则在MM 10 0 0型摩擦磨损试验机上进行高速列车摩擦制动模拟试验 ,研究了SiC颗粒增强铝基复合材料和铜基粉末冶金闸片配对时的制动摩擦性能 ,探讨使用铝基复合材料制动盘的可能性。模拟试验结果表明 :铝基复合材料制动盘和铜基粉末冶金闸片配副进行摩擦制动时具有制动温升低 ,摩擦因数稳定和耐磨性好的优点 ,能满足高速列车的制动性能要求     

南疆铁路某中桥施工测量浅淡

铁路桥梁施工测量是铁路桥梁建设中的关键工作。文章以南疆线某中桥的施工测量为例,介绍桥梁孔径的布置,定位前的复测,墩台定位放线和施工控制等。     

GSM-R系统中无线测量的研究

无线测量集中在移动台与基站之间，主要测量信号电平、信号质量、定时提前量等等。介绍了无线测量的原理、参数、测量流程，以及测量报告的2个应用：通过测量报告分析移动台的行为，进而为查找解决问题提供依据和通过测量报告对网络进行评估。     

火控系统发展方向及亟待研究的几个问题

本文针对现代高技术条件下局部战争对火控系统提出的更新更高的要求，分析探讨了21世纪火控系统发展方向及其亟待研究的几个问题。     

微机联锁远程故障诊断系统的研究

作者论述了微机联锁远程故障诊断系统的构成和实现,提出现阶段信号维修改革的任务、组织管理、及实施远程故障诊断系统的关键技术。     

船舶工业发展与战略性人力资源管理的思考

文章通过中国船舶工业发展趋势的描述,针对近期船舶工业发展的特点,通过对战略性人力资源管理的理解.提出适应我国船舶工业发展应对措施和建议.     

Effects of Test Conditions on Fuel Economy of Gasoline-Powered Vehicle

In this study, the influence on fuel economy testing of gasoline-powered vehicles is evaluated for various test conditions (e.g., laboratory temperature, soaking time, cooling fan, battery charge state, and driving mode tracking). It showed a difference in fuel economy results of approximately 3 % between low (88 %) and high (99 %) battery state of charge conditions because the alternator saving function has a positive effect on fuel economy. Fuel economy testing with laboratory temperature changes gave a slight reduction at 21 °C and slight increase at 29 °C. The cooling fan changes had an almost negligible effect on fuel consumption. The largest fuel economy result varied by 5.2 % in the soft, standard, and rough driving conditions.     

Disturbance Observer-Based Sideslip Angle Control for Improving Cornering Characteristics of In-Wheel Motor Electric Vehicles

In this paper, a robust sideslip angle controller based on the direct yaw moment control (DYC) is proposed for in-wheel motor electric vehicles. Many studies have demonstrated that the DYC is one of the effective methods to improve vehicle maneuverability and stability. Previous approaches to achieve the DYC used differential braking and active steering system. Not only that, the conventional control systems were commonly dependent on the feedback of the yaw rate. In contrast to the traditional control schemes, however, this paper proposes a novel approach based on sideslip angle feedback without controlling the yaw rate. This is mainly because if the vehicle sideslip angle is controlled properly, the intended sideslip angle helps the vehicle to pass through the corner even at high speed. On the other hand, the vehicle may become unstable because of the too large sideslip caused by unexpected yaw disturbances and model uncertainties of time-varying parameters. From this aspect, disturbance observer (DOB) is employed to assure robust performance of the controller. The proposed controller was realized in CarSim model described actual electric vehicle and verified through computer simulations.