双速搅拌工艺

根据传统二次搅拌理论,提出了混凝土双速搅拌工艺,介绍了双速搅拌工艺的原理及优点,并指出了该工艺的实现方案.该工艺的应用可降低生产成本,提高混凝土的强度和生产率.     

基于航速调整的班轮燃油补给优化

燃油成本在班轮运营总成本中占有很大比重,燃油补给是影响航运公司班轮运营成本和效益的一项重要决策.基于航速调整策略,以班轮运营总成本最小化为目标,建立燃油补给混合整数非线性规划模型,运用分段线性逼近法对燃油消耗函数进行线性化处理,并设计了求解算法步骤.实例分析验证了模型和求解方法的有效性.结果表明,在航运市场需求低迷的情况下,船舶更适宜采取较低的航速,采取灵活的加油港策略或放宽船舶到港时间窗限制,能更为有效地降低燃油成本.     

高速铁路路基边坡纤维团粒喷播生态防护技术

针对高速铁路路基绿化工程高要求、少维护等特点,提出纤维团粒喷播技术,并详细阐述了其机理及特点.通过在京雄城际铁路路基边坡工程中的应用,归纳总结了该技术施工工艺流程:平整坡面→坡面覆土→铺设铁丝网→喷播基质→养护管理.喷播基质是利用喷播机械将性能优越的基质材料喷附至铁路路基坡面上的.工程应用表明该技术施工快,质量好,养护维修量小,经济性高.     

鱼雷发动机三组元比例控制器数值模拟

利用计算流体力学软件Pumplinx模拟鱼雷发动机中三组元比例控制器的内部流场,分析计算中不同压差情况下对比例控制器性能的影响,以及叶片与定子间间隙大小对于比例控制器性能的影响,同时对不同叶片数目下性能进行对比。计算结果表明:由于比例控制器为被动旋转马达结构,其转速和流量均随时间呈周期性脉动变化,随着工作压差增大,转速脉动幅度基本保持不变,而流量和扭矩脉动幅值增加;随着间隙增大,泄漏量增大,但流量、扭矩、转速脉动幅值大幅降低,出口流量较为平稳;叶片数目增多后比例控制器转速降低、排量降低。由计算结果推断出目前比例控制器的最优叶片数目为4。本文可为进一步研究比例控制器精度问题提供参考。     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

大型船舶重力抛锚控制系统设计

结合船用锚机使用要求和结构特点,研制一种闭环重力抛锚控制系统,使船舶重力抛锚过程实现自动控制;给出抛锚控制函数及其物理意义;开展实船抛锚试验。结果表明,所研制的系统能有效完成重力抛锚自动控制,满足船舶使用要求。     

内河航道桥梁船撞时船体最大变形量研究

目前在桥梁船撞防护的专项设计或船撞力专题研究中,对船舶撞击力的研究和桥梁在船舶撞击作用下的响应关注较多,而对船体最大变形量的研究较少。基于ANSYSLS-DYNA软件,对4种不同载质量的内河代表船舶在3种航速、2种碰撞角度下撞击4种墩型的船撞工况进行数值模拟,提取船体最大变形量,并分析船体最大变形量与船舶载质量、撞击速度、桥墩类型及撞击角度的关联性,同时与经验公式做对比。研究结果表明,撞击速度及撞击角度是船体最大变形量的主要控制因素,桥墩类型与之关系不明显。     

动力定位船舶全速度路径跟踪CB导引自适应闭环控制

针对仅使用槽道推进器提供横向推力的动力定位船舶路径跟踪控制问题,建立慢变环境干扰影响下的非线性船舶数学模型,设计带有自适应干扰补偿的反步控制算法来消除环境干扰的影响。引入平行目标接近(CB)导引算法为跟踪控制生成期望速度矢量信号,通过与所提出的自适应反步控制算法相结合,得到不受船舶驱动特性限制的全速度范围动力定位船舶导引跟踪控制算法,应用李雅普诺夫稳定性理论证明系统跟踪误差渐进收敛到零。仿真结果表明通过调整导引算法参数可以调节船舶跟踪过程表现,并可以得到较好的控制精度。     

激光复合焊工艺参数选择

针对激光复合焊首次应用于船舶制造,参数众多,缺少针对性试验的问题,进行多参数调整、多次对比试验,分析各项参数对激光复合焊质量的影响,结合试验数据提出各项参数的合理范围,确定的重要参数有激光功率、激光吸收率、焦点位置及光丝间距,与电弧相关的参数有焊接速度、送丝速度,以及过渡形式,各项参数的参数调整会直接影响到复合效果,进而影响焊接质量。     

Theory of safety surrogates using vehicle trajectories in macroscopic and microscopic settings: Application to dynamic message signs controlled traffic at work zones

This paper presents a new mathematical framework for obtaining quantitative safety measure using macroscopic as well as microscopic traffic data. The safety surrogate obtained from the macroscopic data is in terms of analysis performed on vehicle trajectories obtained from the macroscopic data. This method of obtaining safety measure can be used for many different types of applications. The safety surrogate for the traffic dynamics are developed in terms of a new concept of Negative Speed Differentials (NSD) that involve a convolution of vehicle speed function obtained from vehicle trajectories and then performing the integration of the square of the output for its negative values. The framework is applicable to microscopic traffic dynamics as well where we can use car following models for microscopic dynamics or the LWR model for macroscopic dynamics. This paper then presents the use of this new safety surrogate on the development of a feedback control law for controlling traffic in work zones using Dynamic Message Signs. A hybrid dynamics model is used to represent the switching dynamics due to changing DMS messages. A feedback control design for choosing those messages is presented as well as a simple simulation example to show its application.