典型航线船舶排放清单及排放特征研究

文章分析了我国典型航线典型船舶排放特征,以船舶自动识别系统数据为基础,收集整理所选研究船舶排放参数,结合船舶实际航行资料,采用动力法估算了秦皇岛港—广州港航线某散货船一个航行周期的排放清单,并分析了靠港、停泊、港内机动、巡航4个船舶状态下的排放特征,绘制了2 km×2 km分辨率的空间排放特征图。结果表明,该典型航线上典型散货船舶一个航行周期排放的SOx、NOx、PM10、PM2.5总量分别为18.88吨、30.87吨、1.85吨和1.69吨。排放源分析表明从在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源。航行状态上巡航工况排放量最大;船舶排放污染物的空间分析表明,船舶在进出港口区域是污染物排放最密集的区域。     

基于多源数据的公交车能耗碳排放测算模型

公交车能耗碳排放强度与车辆、线路和驾驶员有显著相关关系，为精准刻画其能耗碳排放强度特征，整合OBD监测数据、加油(气)数据、运营排班数据等多源数据资源. OBD监测数据和加油(气)数据呈显著的线性关系，证明修正后的OBD监测数据可满足分析要求. 搭建“速度-能耗碳排放强度曲线”测算模型，幂函数关系的拟合优度R2 =0.972 6 为最高. 实证研究发现，平均速度在10~60 km/h 变化时，液化天然气(LNG)车比柴油车能耗碳排放强度高 3.3%~33.7%，双层车比铰接车高2.4%~13.3%；LNG铰接车在不同线路、相同速度下的强度相差9.6%；不同驾驶员在相同线路的能耗碳排放强度可相差24.2%. 模型为各城市基于多源数据开展公交能耗碳排放目标设定提供数据支撑.     

Did Chinese cities that implemented driving restrictions see reductions in PM10?

Imposing driving restrictions is becoming increasingly popular as a policy intended to control urban air pollution. Existing studies on this topic offer highly mixed observations, and each study tends to focus on only one city. In this paper, we used 11 Chinese cities with driving restrictions as the treatment group, and compared them to other cities that did not implement the policy. Based on a propensity score matching and difference-in-difference analysis, we found no evidence of a decrease in PM10 concentrations in cities after they implemented driving restrictions. This finding may be attributed to an increase in the number of cars in these cities after implementing driving restrictions, but we also found no evidence of an improvement in air quality for a given number of cars after implementation of the policies.     

Efficiency evaluation and PM emission reallocation of China ports based on improved DEA models

The emission of particulate matter (PM) and other atmospheric pollutants in port operations and shipping have caused a huge negative impact on the environment. Consequently, how to evaluate the environmental efficiency of ports and put forward corresponding countermeasures on this basis is becoming a more important issue than ever before from the perspectives of the government, academia, and society. We construct three data envelopment analysis (DEA) models to evaluate the environmental efficiency of ports under the circumstances of environmental control, non-environmental control and PM emission through inter-ports cooperation. The innovation of the DEA models constructed in this paper lies in: (1) Setting environmental control parameters to uniformly manipulate the situations of environmental control and non-environmental control, etc.; (2) Allowing non-equal proportional change of input index, expected output and non-expected output index; (3) Setting preference coefficients for ports to admit favorable decisions; (4) Providing a distance formula of expected output for PM emission reallocation. Further, data from 11 major ports in China are collected to compare the expected output under different PM emission standards assuming the situation of environmental control and non-environmental control, port cooperation, and non-cooperative sewage discharge. The empirical results show that: (1) Ports in the eastern China (Shanghai, Ningbo, and Nanjing) have higher port efficiency; (2) Port cooperation can improve the overall expected output but it will lose its edge with the improvement of PM emission standards. (3) Ports follow the same trend of output loss regardless of favorable decisions. In the end, the author makes a summary, puts forward relevant policy suggestions and makes the recommendation for future research.     

基于正交设计的船用柴油机燃烧系统参数匹配及优化

为研究柴油机燃烧系统参数匹配对柴油机动力和排放性能的影响,首先分别利用AVL_BOOST和AVL_FIRE仿真软件建立4190ZLC-2型船用柴油机整机模型和缸内燃烧高压循环模型,然后基于已建模型应用正交试验设计方法安排柴油机进气系统、喷油系统和燃烧室结构尺寸参数匹配仿真计算。研究结果表明,通过极差分析可以得出燃烧系统参数对4190ZLC-2型柴油机性能的影响主次顺序。以柴油机指示功率为评价指标时,参数组合0.26 mm-28°CA-160°-0.9-145 mm-2.6 mm-22 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的指示功率为63.40 k W,比原机仿真值高15%;以NOX排放为评价指标时,参数组合0.30 mm-24°CA-140°-0.4-135 mm-6.6 mm-14 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的NOX排放质量分数为0.015 7%,比原机仿真值低30.2%。     

4缸柴油机停缸仿真及试验研究

采用停缸技术对小型4缸柴油机的燃油消耗率和排放进行了仿真和试验研究。利用GT-Power建立模型并模拟了停缸位置对燃油消耗率的影响,结合传热损失等因素确定了试验停缸位置。在断油式停缸和断油断气式停缸模式下进行试验和燃烧分析。试验结果表明:停缸后缸内等容度降低;断油式停缸后燃油消耗率和NOx增大但炭烟减少;断油断气式停缸后部分试验点燃油消耗率降低,但NOx和炭烟排放增加。     

乙醇汽油对车辆颗粒物排放的影响

在符合国Ⅰ、国Ⅲ、国Ⅴ标准的3辆试验车上,分别燃用国Ⅴ汽油、低芳烃E10、低烯烃E10 3种燃料,进行了NEDC和WLTC工况下的常温冷起动排放试验,重点对颗粒物(PM)排放量和粒子数量(PN)进行分析。结果表明:在两种工况下,燃用乙醇汽油相比普通汽油能大幅降低车辆的PM排放,低芳烃E10对国Ⅰ和国Ⅲ车辆PM降低效果最明显,分别下降19%和35%,低烯烃E10对国Ⅴ车辆PM降低效果最好,下降46%;在WLTC工况下燃用乙醇汽油能大幅降低车辆PN排放,其中低芳烃E10平均降低43%,低烯烃E10平均降低32%。     

轻型汽油车N_2O排放特性研究

选择1辆满足国Ⅴ排放标准的轻型汽油车作为试验样车,应用全流稀释排放测试系统在FTP75和US06测试循环下,对车辆在不同测试工况下的N_2O排放水平、车辆N_2O排放的影响因素以及N_2O排放随着车辆里程增加的劣化情况进行了研究。研究结果表明:FTP75循环下的N_2O排放结果高于US06循环,前者是后者的4倍左右;在冷起动阶段,由于催化剂没有达到正常的工作温度,车辆会产生较多的N_2O排放,且随着燃油硫含量的增加,车辆的N_2O排放呈现上升的趋势;随着车辆里程的不断增加,车辆的N_2O排放存在一定程度的劣化。     

也论柴油轿车在国内市场的发展前景

研究了世界范围内柴油机在乘用车领域内的应用现状,阐述了柴油机作为车用动力的优势。根据国内的政策环境与市场环境,分析了排放法规、柴油品质对市场的影响。根据对柴油轿车的性能要求,包括振动和噪声、排放等,分析了更适合我国轿车柴油机发展的技术路线,并重点对若干关键技术和难点进行了剖析。柴油机技术进步和市场化应用表明,柴油轿车在我国具有广阔的应用前景,政府和企业应做好政策和技术上的准备。     

典型加筋板拉伸疲劳试验方法

加筋板是船体结构的主要组成部分,针对船用加筋板试件在疲劳试验过程中连接段先于考核段破坏的技术问题,文章开展了加筋板拉伸疲劳试验技术研究,提出了加筋板拉伸疲劳试件设计方法。在此基础上,依据疲劳累积损伤理论,结合声发射动态裂纹检测技术,建立了基于声发射技术的疲劳累积损伤试验方法。通过加筋板拉伸疲劳试验验证了该方法的可行性和适用性,实现了疲劳试验的考核目标,可为以后类似结构疲劳试验提供方法参考。