Visualisation of uncertainty in probabilistic traffic models for policy and operations

This study investigates different methods to visualise uncertainty in static representations of probabilistic traffic models predictions on road-networks. Although various graphical cues may be used to represent uncertainty it is not a priori clear which of them are most suited for this purpose, since their legibility, intelligibility and the degree to which they interfere with other graphical elements in a representation differ widely. Several graphical uncertainty representations were therefore developed and analysed in expert sessions. A selection of the initial set of uncertainty visualisations was further evaluated in a cognitive alternative task-switching experiment. The results show that graphical representations are able to convey uncertainty information relatively accurately, while some uncertainty visualisations outperform others. It depends on the model and scenario which representation is most suited for a given application. This paper presents an overview of possible graphic uncertainty representations and the considerations involved when applying them to uncertainty in traffic model visualisations.     

水下机器人动力定位模糊逻辑控制的虚拟现实仿真（英文）

In this paper, graphical-user-interface(GUI) software for simulation and fuzzy-logic control of a remotely operated vehicle(ROV) using MATLAB TM GUI Designing Environment is proposed. The proposed ROV’s GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative(PID) and sliding-mode controller(SMC) systematically and interactively. External disturbance such as sea current can be added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.     

The development of the TIGRIS XL model: A bottom-up approach to transport, land-use and the economy

The project appraisal method in the Netherlands distinguishes direct effects, indirect distribution effects and indirect generative effects. Transport models are generally available for calculating the benefits of transport projects to travellers as part of the direct effects. The TIGRIS XL model, a Land-Use and Transport Interaction model, adds indirect distribution effects for the housing and labour market, by modelling changes in the spatial distribution of jobs and residents. This paper describes the current TIGRIS XL model and how it can be applied in the evaluation of transport projects. It refers to work done with the TIGRIS XL model to improve the calculation of the direct benefits by applying the so-called ‘logsum’ method. Finally it discusses ideas on how to extend the TIGRIS XL model to address indirect generative effects as well.The current TIGRIS XL model, its integration with the National Model System (the standard tool for the Dutch government to analyse the effects on passenger transport) and basic design principles are the starting point of such an exploration. These design principles include:

•

an emphasis on detail, both spatial as well as in socio-economic segments, to account for differences in the availability of choice alternatives and in choice behaviour, and to provide impacts by region and socio-economic group;

•

the requirement that the relationships used rest on an empirical foundation.

The post-processing methods proposed on this paper for the calculation of the direct benefits and indirect generative effects are consistent with these design principles. To calculate the indirect generative effects, a post-processing module is proposed which transforms changes in travel times and land-use into agglomeration effects. These agglomeration effects combine several of the generative effects, like scale economies, an increasing variety of products, labour market matches and knowledge spill-over. The effects of changes in the agglomeration indicator on productivity can be estimated with existing data sources, as was demonstrated in the UK (Graham, 2005).     

Evolution of research themes in Maritime Policy & Management—1973–2012

From its first issue in 1973, Maritime Policy & Management (MPM) has sought to be the main outlet for shipping and port research. During its 40-year development, it has indeed become the flagship journal in the field marked by its inclusion into the SSCI list in 2011. This paper examines how maritime research has developed over the last four decades by reviewing all the published papers in MPM. There has been a remarkable inflow of authors and institutions to MPM in recent decades especially from Asian countries. While ‘shipping’ research has been the most popular research area, a relative increase in ‘ports’ research has been observed in recent years. While economics has been a dominant disciplinary base, management-related disciplines contributed to the journal in the 2000s, increasing the disciplinary diversity of MPM. The study is useful not only for understanding the past and current state of maritime research, but also for developing a concrete foundation to discuss further development of MPM.     

半自动闭塞车站接近电码化技术改进方案

半自动闭塞车站一般为接近连续式移频机车信号。当机车由区间无码区段压上接近区段后，从轨道继电器落下到脉动切换开始发送移频信息，再经车上机车信号主机查询接收后，提供给运行监控器，至少要滞后4s以上。此时若按图定速度继续运行，则监控器判断为速度超标，马上强制放风，迫使列车减速或停车，严重影响列车的运行安全和运输效率。特别是已提速至120km／h的干线区段，如杭州枢纽沪杭、浙赣老线等，该问题非常突出，必须加以改进。     

An approach to estimating the hull girder response of a ship due to springing

This article describes an estimation method for the hull girder response of a ship due to springing. The linear and nonlinear springing effects on the hull girder are evaluated. Previous studies on the springing response focused mainly on the symmetric response, or vertical response. In this article, however, the springing analysis is extended to asymmetric responses, or horizontal and torsional responses. The Timoshenko beam model was used to calculate the hull girder response and the quadratic strip method was employed to calculate hydrodynamic forces and moments on the hull. To remove irregular frequencies, a rigid lid was adopted on the hull free surface level and hydrodynamic coefficients were interpolated for asymptotic values. Applications to two ships for the symmetric and asymmetric responses were carried out and the effect of springing responses is also discussed.     

Mean Value WGT Diesel Engine Calibration Model for Effective Simulation Research

Recently, to improve vehicle fuel economy, as well as the performance of internal combustion engines, optimized system matching between a vehicle’s drivetrain and engine has become a very important technical issue. For this reason, the need for simulation research on engine and vehicle performance improvement has increased. But in general, since both engine simulation and vehicle simulation require initial engine calibration map input, a simple engine calibration method is required for the efficient configuration of various virtual engine calibration map setups. On this background, in this study, an example of waste gate turbocharger (WGT) cooled — exhaust gas recirculation (EGR) Diesel engine calibration using a test-based mean value engine model is presented as a suitable engine calibration map setting method. Also, the feasibility of an engine calibration model is confirmed through various engine tests. Using the simple model presented here, it is possible for diverse engine operating conditions and engine performance maps to be acquired.     

A disaggregate stochastic freight transport model for Sweden

Transportation - This paper presents estimation results for models of transport chain and shipment size choice, as well as an implementation of the estimated disaggregate models (for two commodity...     

Design and simuation of a vehicle test bed based on intelligent transport systems

As growing demand of vehicle safety system, especially regarding intelligent transport systems (ITS), automotive manufacturers are focusing more on driving safety and efficient transportation for vehicle users. Many safety systems have been launched in the market recently so, it is important to evaluate the vehicle safety systems and ITS. The ITS based intelligent vehicle test bed was constructed to meet the growing demand of test and verification for such ADAS and ITS systems. First, this paper describes in detail concept of the test-bed. This test-bed is carefully designed to meet the requirements of ISO/TC204 standards. In order to verify the design of the test-bed, virtual test with driving siulator was processed on a virtual test tracks. This test-bed will be used to conduct testing on various ITS and ADAS technologies, such as adaptive cruise control (ACC), lane departure warning system (LDWS), cooperative intersection warning system as well as rollover stability control (RSC) and electronic stability control (ESC), etc.     

The impact of port operations on efficient ship operation from both economic and environmental perspectives

Recently, shipping lines have focused on efficient ship operation, which relates to energy efficiency issues in shipping and, particularly, to operational issues such that the minimisation of fuel consumption and resulting greenhouse gas emissions. Efficient ship operation in container lines is closely related to the ship’s time at sea and ship’s time in port. Reduction in port time, thanks to high-quality port operations, allows improvement in the operational efficiency of a liner service by reducing the fuel consumption of a ship at sea and its resulting CO₂ emissions. The main goal of this article is to investigate how time in port affects efficient ship operation in terms of operating costs, CO₂ emissions and externalities. For this, as a methodology, a simulation based upon system dynamics is introduced. Major finding is that less time in port resulting from the improvement of port operations contributes to efficient ship operation in terms of operating costs, amount of CO₂ emissions and external effects in the liner shipping industry. In particular, a sensitivity analysis on efficient ship operation vis-à-vis the quality of port operation shows that bigger ships need to select highly productive calling ports that provide less time in port.