Toward using social media to support ridesharing services: challenges and opportunities

Ridesharing has been attracting increasing attention from both academia and industry. One of the challenges posed by the study of ridesharing is to identify the most valuable information for improving the ridesharing decisions taken by participants. Another challenge is to use harvesting techniques to extract specific types of travel-related information. Many methods have been developed by the community in order to solve these issues. However, due to a lack of information sharing between different transit authorities and the difficulty of identifying subjective perceptions of the experience of ridesharing, understanding and evaluating how social media data might support or obstruct goals for mobility, safety and environmental sustainability in ridesharing is a difficult task. In this survey, we first analyze the literature on ridesharing with a focus on the properties and model of service, and introduce a framework to describe the major components required for a ridesharing service. Then, we illustrate the potential value of information extracted from social media and present the rationale for harvesting travel-related data. Finally, we detail some possible directions and different approaches for using social media data, and highlight their assets and drawbacks.     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

以洞代桥在市政道路软弱地基中的应用

四川渠县土溪镇市政道路跨河工程，地基软弱。通过对桥梁、明洞设计方案的技术经济比较，明洞方案具有明显的优点，采用以洞代桥的方案是适宜的。     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

隧道掌子面画像处理系统的开发及其在工程中的应用

介绍隧道掌子面画像处理系统的开发、构成及功能。利用数字摄像及图像处理技术，快捷、准确地描述隧道掌子面地质构造的揭示情况，为信息化设计、信息化施工及时提供指导性的参考资料，并可作为对其他超前地质预报结果的验证环节。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

基于PCI总线的高速智能通信适配器的设计与实现

区域性控制计算机联锁系统正逐步成为计算机联锁系统新的发展方向，区域联锁系统要求有一个高速，可靠，传输距离远的安全数据通信网，来保证铁路信号安全信息的可靠，实时，高效的传输，文章分析了影响系统通信性能的几项瓶颈因素及其优化方法，并介绍了智能通信适配器的设计思想及实现方法。     

柴油闪急沸腾喷雾的试验研究

通过对柴油机高压油管进行外加热源加热热，在Ｅ１５０柴油机上实现柴油的闪急沸腾喷雾，并对柴油机的性能及排放进行了试验研究。结果表明，采用闪急沸腾喷雾，柴油机油耗可降低８ｇ／ｋＷ．Ｈ，烟度下降０．４ＢＳＵ，ＮＯＸ排放略有升高，ＣＯ，ＨＣ排放均降低。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.