Comparison of robust H∞ filter and Kalman filter for initial alignment of inertial navigation system

There are many filtering methods that can be used for the initial alignment of an integrated inertial navigation system. This paper discussed the use of GPS, but focused on two kinds of filters for the initial alignment of an integrated strapdown inertial navigation system (SINS). One method is based on the Kalman filter (KF), and the other is based on the robust filter. Simulation results showed that the filter provides a quick transient response and a little more accurate estimate than KF, given substantial process noise or unknown noise statistics. So the robust filter is an effective and useful method for initial alignment of SINS. This research should make the use of SINS more popular, and is also a step for further research.     

Application of H∞ filtering in the initial alignment of strapdown inertial navigation system

In this paper , the principle of H∞ filtering is discussed and H∞ filter is constructed, which is used in the initial alignment of the strapdown inertial navigation systems(SINS). The error model of SINS is derived. By utilizing constructed H∞ filter, the filtering calculation to that system has been conducted. The simulation results of the misalignment angle are given under the condition of unknown noises. The results show that the process of alignment with H∞ filter is much faster and with excellent robustness.     

Research on integrated navigation method for AUV

The principles of the SINS/DVL integrated navigation system are introduced, and the compass status accuracy is compared. When the heading is changed, the dead reckoning algorithm using the heading information of the SINS （Strapdown inertial navigation systems） and DVL （doppler velocity log） is adopted to substitute the SINS/DVL integrated system. The simulation results show that the method can improve the accuracy of integrated navigation system when AUV （autonomous underwater vehicle） is in motion.     

Research on catastrophe control in 1-D system

A new method of catastrophe control is described in one dimension nonlinear system. Catastrophe control based on catastrophe theory is a brand new area for control theory. A certain catastrophe is created at a desired location by appropriate control, which has preferred properties. Washout filter is presented and applied to preserve the original equilibrium of a system.Washout filter aided dynamic feedback controller is developed for the creation of eatastrophe, and an example is given to illustrate the process. Catastrophe control may provide a new way of designing warning signals of impending collapse or catastrophe for monitoring and control purposes.     

Design optimization of a torpedo shell structure

An optimized methodology to design a more robust torpedo shell is proposed. The method has taken into account reliability requirements and controllable and uncontrollable factors such as geometry, load, material properties, manufacturing processes, installation, etc. as well as human and environmental factors. The result is a more realistic shell design. Our reliability optimization design model was developed based on sensitivity analysis. Details of the design model are given in this paper. An example of a torpedo shell design based on this model is given and demonstrates that the method produces designs that are more effective and reliable than traditional torpedo shell designs. This method can be used for other torpedo system designs.     

Application of H~∞ control in rudder/flap vector robust control of a ship's course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The "2-Riccati" equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

Application of H∞ control in rudder/flap vector robust control of a ship＇s course

Given the uncertainty of parameters and the random nature of disturbances that effect a ships course, a robust course controller should be designed on the basis of rudder/flap vector control. This paper analyzes system uncertainty, and the choice of weighting functions is also discussed. When sea waves operate on a ship, the energy-concentrating frequency varies with the angle of encounter. For different angles of encounter, different weighting functions are designed. For the pole of a nominal model existing in an imaginary axis, the bilinear-transform method is used. The ＂2-Riccati＂ equation is adopted to solve the H∞ controller. A system simulation is given, and the results show that, compared with a PID controller, this system has higher course precision and more robust performance. This research has significant engineering value.     

Route design and automatic check in electronic chart display and information system

For an electronic chart display and information system ( ECDIS), the most important function is the route design. In this paper,a novel approach to developing ECDIS was given and then an effective method was proposed for route design and automatic check. The mathematical model and logical relationship for coordinate transformation were also provided. They were adopted in ECDIS developing, which was based on the research of the Vxworks real-time operating system. The actual system application implies that the method is practical and can held navigation verv well.     

Robust digital image watermarking against shearing based on haar orthogonal function system

In this paper, a robust digital watermarking method against shearing based on Haar orthogonal function system was introduced. The proposed method adopted the complete generalized orthogonal properties of Haar orthogonal function system to achieve the piece -based orthogonal transform on the image. The significant middle frequency coefficients in the transformation matrix are picked up, based on characteristics of the image visual system and the Haar orthogonal transform. The watermark is adoptively weighed to the middle frequency matrix. The method improves the validity of watermarking and shows excellent advantage against shearing attack. Experimental results show that the Haar orthogonal function system based watermark approach can provide an excellent protection under geometric attacks.     

具有惯性表面的两层流体的柯西-泊松问题(英文)

This paper is concerned with the generation of waves due to initial disturbances at the upper surface of a two-layer fluid, as the upper layer is covered by an inertial surface and the lower layer extends infinitely downwards. The inertial surface is composed of thin but uniform distribution of non-interacting material. In the mathematical analysis, the Fourier and Laplace transform techniques have been utilized to obtain the depressions of the inertial surface and the interface in the form of infinite integrals. For initial disturbances concentrated at a point, the inertial surface depression and the interface depression are evaluated asymptotically for large time and distance by using the method of stationary phase. They are also depicted graphically for two types of initial disturbances and appropriate conclusions are made.     

Research and implementation of digital detection method on closed loop FOG

In the strapdown inertial navigation system, the Fiber Optical Gyro(FOG) must have high precision to give accurate navigation information. In this paper, a digital closed loop detection method based on the ramp wave modulating technigue is introduced. DSP and FPGA have many advantages in digital signal processing. In the design, by using DSP,a complex arithmetic operation is completed to meet the needs of closed loop control of FOG within a short time. All kinds of control signals are produced easily by FPGA, under which DSP could work properly. Combining the DSP and FPGA,the detecting method is implemented successfully. In the end, the result of test and performance is given. From the result we can conclude that the precision of FOG is improved and the noises are limited to a low level.     

水下无人潜航器航向H_∞鲁棒容错控制器设计(英文)

In order to improve the security and reliability for autonomous underwater vehicle (AUV) navigation, an H∞ robust fault-tolerant controller was designed after analyzing variations in state-feedback gain. Operating conditions and the design method were then analyzed so that the control problem could be expressed as a mathematical optimization problem. This permitted the use of linear matrix inequalities (LMI) to solve for the H∞ controller for the system. When considering different actuator failures, these conditions were then also mathematically expressed, allowing the H∞ robust controller to solve for these events and thus be fault-tolerant. Finally, simulation results showed that the H∞ robust fault-tolerant controller could provide precise AUV navigation control with strong robustness.     

Multi-agent immune recognition of water mine model

It is necessary for mine countermeasure systems to recognise the model of a water mine before destroying because the destroying measures to be taken must be determined according to mine model. In this paper, an immune neural network （INN） along with water mine model recognition system based on multi-agent system is proposed. A modified clonal selection algorithm for constructing such an INN is presented based on clonal selection principle. The INN is a two-layer Boolean network whose number of outputs is adaptable according to the task and the affinity threshold. Adjusting the affinity threshold can easily control different recognition precision, and the affinity threshold also can control the capability of noise tolerance.     

Underwater simultaneous localization and mapping based on forward-looking sonar

A method of underwater simultaneous localization and mapping (SLAM) based on forward-looking sonar was proposed in this paper. Positions of objects were obtained by the forward-looking sonar, and an improved association method based on an ant colony algorithm was introduced to estimate the positions.In order to improve the precision of the positions, the extended Kalman filter (EKF) was adopted. The presented algorithm was tested in a tank, and the maximum estimation error of SLAM gained was 0.25 m. The tests verify that this method can maintain better association efficiency and reduce navigation error.     

槽道型高速滑行艇船型的自动生成(英文)

The creation of geometric model of a ship to determine the characteristics of hydrostatic and hydrodynamic, and also for structural design and equipments arrangement are so important in the ship design process. Planning tunnel high speed craft is one of the crafts in which, achievement to their top speed is more important. These crafts with the use of tunnel have the aero-hydrodynamics properties to diminish the resistance, good sea-keeping behavior, reduce slamming and avoid porpoising. Because of the existence of the tunnel, the hull form generation of these crafts is more complex and difficult. In this paper, it has attempted to provide a method based on geometry creation guidelines and with an entry of the least control and hull form adjustment parameters, to generate automatically the hull form of planning tunnel craft. At first, the equations of mathematical model are described and subsequent, three different models generated based on present method are compared and analyzed. Obviously, the generated model has more application in the early stages of design.     

Global robust and adaptive output feedback dynamic positioning of surface ships

A constructive method was presented to design a global robust and adaptive output feedback controller for dynamic positioning of surface ships under environmental disturbances induced by waves, wind, and ocean currents. The ship’s parameters were not required to be known. An adaptive observer was first designed to estimate the ship’s velocities and parameters. The ship position measurements were also passed through the adaptive observer to reduce high frequency measurement noise from entering the control system. Using these estimate signals, the control was then designed based on Lyapunov’s direct method to force the ship’s position and orientation to globally asymptotically converge to desired values. Simulation results illustrate the effectiveness of the proposed control system. In conclusion, the paper presented a new method to design an effective control system for dynamic positioning of surface ships.     

Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

航行于波浪中的肥大型船波浪增阻计算研究(英文)

Under the background of the energy saving and emission reduction, more and more attention has been placed on investigating the energy efficiency of ships. The added resistance has been noted for being crucial in predicting the decrease of speed on a ship operating at sea. Furthermore, it is also significant to investigate the added resistance for a ship functioning in short waves of large modern ships. The researcher presents an estimation formula for the calculation of an added resistance study in short waves derived from the reflection law. An improved method has been proposed to calculate the added resistance due to ship motions, which applies the radiated energy theory along with the strip method. This procedure is based on an extended integral equation (EIE) method, which was used for solving the hydrodynamic coefficients without effects of the irregular frequency. Next, a combined method was recommended for the estimation of added resistance for a ship in the whole wave length range. The comparison data with other experiments indicate the method presented in the paper provides satisfactory results for large blunt ship.     

Modeling and software implementation of flight system for simulator of a new fighter

Real-time modeling and simulation of flight system are the key parts of simulator. After describing the architecture of simulator for a newer fighter, author presents the composition of flight system and its mathematic models. In this paper, aircraft is regarded as an elastic flight body. And a new integrated algorithm which can remedy the shortcoming of Euler method and four-element method is used to calculate the Eulerian angles of aircraft. Finally, the software implementation of the flight system is given in the paper.     

水下地形辅助导航中局部地形特征的快速提取方法（英文）

Terrain matching accuracy and real-time performance are affected by local underwater terrain features and structure of matching surface. To solve the extraction problem of local terrain features for underwater terrain-aided navigation(UTAN), real-time data model and selection method of beams are proposed. Then, an improved structure of terrain storage is constructed, and a fast interpolation strategy based on index is proposed, which can greatly improve the terrain interpolation–reconstruction speed.Finally, for the influences of tide, an elimination method of reference depth deviation is proposed, which can reduce the reference depth errors caused by tidal changes. As the simulation test shows, the proposed method can meet the requirements of real-time performance and effectiveness. Furthermore, the extraction time is considerably reduced, which makes the method suitable for the extraction of local terrain features for UTAN.