船舶低硫柴油系统设计的分析与优化

就新辟航线首制船“汉亚直达”集装箱船的低硫柴油系统,叙述了船舶低硫柴油系统的设计经验,从当前国内外对船用燃油硫含量的要求、应对方案到船舶低硫柴油冷却方式选择、低硫柴油冷却系统设计、高/低硫柴油转换、使用低硫柴油风险分析及处理等方面进行详细叙述,为业内同行提供参考。     

艰险山区铁路施工营地建设关键技术问题研究

艰险山区铁路工程沿线地区一般具有自然灾害频发、高原高寒缺氧、建设条件极为困难、施工周期超长等复杂的外部环境。为满足艰险山区铁路施工营地建设“以人文本”需求,给参建人员生活提供适宜安全的环境,基于艰险山区铁路工程施工营地建设的外部环境分析,从房屋材质备选方案比选、营地建设需解决的关键技术问题、节能环保等方面对施工营地建设关键技术问题进行研究,并提出具体的方案与建议。研究成果可为山区铁路及类似工程的施工营地建设提供参考借鉴。     

基于生长曲线函数的货车运营环节碳达峰研究

货车是我国大气环境污染的重要来源之一，也是影响我国碳达峰总体目标实现的重要因 素。本文从货车运营环节入手，在运用生长曲线函数对货车保有量进行预测的基础上，对不同类 型货车的保有量和单车碳排放变化进行研究，并从货车节能技术发展、新能源货车推广和应用进 程两方面入手，分3种情景对货车运营环节中产生的碳排放总量趋势进行预判，推演货车运营环 节的碳达峰时间。研究结果表明，只有同时加快货车节能技术发展以及新能源货车推广和应用 进程，货车运营环节中产生的碳排放总量规模才能得到有效抑制并逐渐减少。若到 2030 年货 车单车燃料消耗水平较 2019 年降低 20%以上，新能源货车在货车整体保有量中的占比达到 20%，到 2060 年货车单车燃料消耗水平较 2019 年降低 50%，新能源货车占比达到 50%，则货车 运营环节碳达峰时间将缩短至2030年左右实现，2030年后货车运营环节产生的碳排放总量规 模将逐渐减少。     

复合动力超长续航无人艇系统的设计与实现

为实现无人艇在海上追踪、搜救、巡逻、反潜等任务中的超长续航,避免因油料限制而被迫任务中断,设计了一套以风能、太阳能为动力的无人艇系统,利用风帆为无人艇推进,太阳能为船上电控设备提供电能。该系统由无人艇和岸基监控平台组成,无人艇可通过python开发的数据采集模块和算法模块实时采集环境数据、计算、生成并下达控制指令,在风区内可超长续航自主航行,实现全风向利用；岸基监控平台可实时监控无人艇状态,并进行自主/遥控模式切换。对系统进行了测试,通讯连接试验的可靠性高；无人艇航行试验验证了全风向自主航行的可行性,运行轨迹与仿真结果基本重合；太阳能供电分析理论上验证了风区超长续航的可实现性。     

A comparative life-cycle energy and emissions analysis for intercity passenger transportation in the U.S. by aviation,intercity bus,and automobile

Intercity passenger trips constitute a significant source of energy consumption, greenhouse gas emissions, and criteria pollutant emissions. The most commonly used city-to-city modes in the United States include aircraft, intercity bus, and automobile. This study applies state-of-the-practice models to assess life-cycle fuel consumption and pollutant emissions for intercity trips via aircraft, intercity bus, and automobile. The analyses compare the fuel and emissions impacts of different travel mode scenarios for intercity trips ranging from 200 to 1600 km. Because these modes operate differently with respect to engine technology, fuel type, and vehicle capacity, the modeling techniques and modeling boundaries vary significantly across modes. For aviation systems, much of the energy and emissions are associated with auxiliary equipment activities, infrastructure power supply, and terminal activities, in addition to the vehicle operations between origin/destination. Furthermore, one should not ignore the embodied energy and initial emissions from the manufacturing of the vehicles, and the construction of airports, bus stations, highways and parking lots. Passenger loading factors and travel distances also significantly influence fuel and emissions results on a per-traveler basis. The results show intercity bus is generally the most fuel-efficient mode and produced the lowest per-passenger-trip emissions for the entire range of trip distances examined. Aviation is not a fuel-efficient mode for short trips (<500 km), primarily due to the large energy impacts associated with takeoff and landing, and to some extent from the emissions of ground support equipment associated with any trip distance. However, aviation is more energy efficient and produces less emissions per-passenger-trip than low-occupancy automobiles for trip distances longer than 700–800 km. This study will help inform policy makers and transportation system operators about how differently each intercity system perform across all activities, and provides a basis for future policies designed to encourage mode shifts by range of service. The estimation procedures used in this study can serve as a reference for future analyses of transportation scenarios.     

Layout optimization of an inertial energy harvester for miniature underwater mooring platforms

Comprehensive analyses of the layout influence on power performance of a low-frequency miniature horizontal-pendulum-type inertial energy harvester for underwater mooring platforms are presented in this article. The mathematical models are obtained utilizing the Newton-Euler method. The power performance is evaluated by simulations over different parameters, such as damping, excitation frequency, and layout position. Simulation results indicate that the harvester can extract energy from low-frequency excitations over the range of 0.1 Hz–0.4 Hz, and maximum output power can reach to 0.7 W under excitation frequency f = 0.4 Hz. Different layout positions influence the energy harvesting performance of the harvester dramatically. Changing the layout position to positive value can enhance and broaden the power performance. The amplitude responses with different layout positions do not show resonant characteristics, even near the natural frequency of the harvester, due to large amplitude vibrations and strong nonlinear characteristic. As excitation frequency f = 0.4 Hz, there is a zero output power point appears at layout position d = −1.3 m. Moreover, the harnessed power has a quadratic relationship with the layout position value.     

粉质黏土层大直径泥水盾构掘进地层扰动分析

针对盾构机在粉质黏土层中推进引起的地层扰动进行分析尤为重要。以新建京张高铁JZSG-1标段清华园隧道2号～1号盾构区间为例,采用现场实测与数值模拟相结合的方法,研究大直径泥水平衡盾构隧道穿越粉质黏土层引起的地层扰动,得到土体横向水平位移及地表沉降的变化规律。需对横向1.5D范围内地表及建(构)筑物进行地层加固、加强监控量测;在盾构掘进过程中,应根据沉降数据实时调整盾构掘进参数及加固方案,以期更好地控制地表沉降。针对掌子面释放系数和注浆层软化模量进行参数分析数值计算,提出地表沉降的有效控制方法,在条件允许情况下适当提早管片的拼装及适当加快注浆层的硬化速度,可有效控制地表沉降。     

某船右主机不能正常建立滑油压力的故障排除

文章对某船右主机启动过程中,机带滑油泵不能正常建立滑油压力进行了分析,制定了针对性的排除故障措施,通过在机带滑油泵通舱管吸入口处安装吸入止回阀解决了滑油压力非正常下降的故障,实船应用证明措施合理,对同类故障排除有较好的借鉴意义。     

一种新的碰撞耗散能快速估算方法及其在船—平台碰撞事故中的应用研究

海洋平台在作业过程中存在遭受船舶碰撞的潜在危险,一旦事故发生将可能导致结构严重损伤从而影响平台的作业安全,因此在平台结构设计阶段需要考虑其抗撞性能.文章以海洋供应船撞击半潜式钻井平台为研究对象,基于碰撞外部动力学理论和DNV规范计算方法,计及平台艏摇运动响应的影响,提出了一种新的耗散能估算方法-DNV`R解析法.以非线性有限元船-平台碰撞数值仿真结果为参考,将该解析法与规范法、Zhang解析法及Liu解析法计算结果进行对比,研究得出:文中所提出的DNV`R解析法弥补了规范法较为保守且仅适用于对心碰撞场景的不足,计算过程简单、便捷,且计算精度与Zhang解析法和Liu解析法基本接近,能够满足船-平台碰撞耗散能快速估算的精度要求.