Nb-Ti微合金化汽车用钢QStE340～46T0M的开发研究

基于对珠钢EAF-CSP流程Nb微合金化技术的系统研究,有效地解决了混晶问题,并利用Nb-Ti复合微合金化技术成功地开发了汽车用钢QStE340～460TM。分析结果表明,开发的含Nb-Ti钢带具有优异的韧性、冷成形性能和良好的焊接性能,完全满足汽车、半挂车用钢的要求。     

部分斜拉桥施工力学性能分析

为了解多跨部分斜拉桥施工过程中结构力学性能的演变过程,从而对桥梁进行有效的施工控制,以开封黄河二桥主桥为例,采用有限元程序MIDAS Civil建立全桥有限元模型,进行施工过程仿真计算,分析其施工力学性能。分析结果表明,主梁成桥时压应力最大,次边跨初步和最终合龙对边塔塔底应力影响较大;中塔偏位较小,边塔在次边跨初步合龙阶段易产生较大纵向偏位;索力变化较小,可一次性张拉到位;桥梁整体稳定性较好;桥梁在各施工阶段的第1阶失稳均为桥塔面外反对称失稳。     

葑溪大桥施工控制

为了保证葑溪大桥的施工安全和质量,根据预应力混凝土斜拉桥悬臂浇筑和支架现浇非对称施工特点,建立施工控制计算模型,探讨影响主梁线形及斜拉索索力的因素,并制定相应控制措施,对主梁线形、内力、索力、牵索挂篮应力和变形进行有效监控.施工控制结果表明:成桥状态下,主桥轴线实测标高、桥梁应力状态、成桥索力均满足设计要求,挂篮在施工过程中的应力状态及变形情况与试验变化趋势基本一致.     

WD/WP气缸体铸造工艺的持续优化

文章分析了WD/WP气缸体的铸造工艺,指出该汽缸体铸件存在主要质量问题,结合本厂实际生产条件,提出了行之有效的解决办法。结果显示,铸件的质量明显提高。     

船用钢缆固定座超声检测工艺研究

船用钢缆固定座为铸铁件,其内部缺陷的检测主要采用超声检测技术。本文简述了针对固定座铸铁件的特点,选择双晶探头进行超声检测,更好地解决了单探头超声检测不足的问题。     

高墩大跨连续刚构桥施工中的关键技术研究

针对山区高墩大跨度连续刚构桥梁施工的特点,结合工程实例,从主梁结构设计、悬臂浇筑施工技术要点、高墩边孔现浇施工、合龙段施工与体系转换控制技术等方面,对连续刚构桥梁施工技术难点和重要控制环节进行系统地分析,可为类似工程项目提供参考和借鉴。     

EFFECT OF La-RICH RE ON THE STRUCTURE AND PROPERTIES OF B319 ALLOY IN LOST FOAM CASTING

IntroductionLost foam casting( LFC) process is a newtechnology that is different from the conventionalempty mould cavity casting completely.This tech-nology is an important orientation of casting tech-nology,and is called as casting technology for to-morrow.At present,the studies on LFC are fo-cused on casting techniques mainly[1～ 5] .There islittle information on the structure and mechanicalproperties of B31 9in LFC process.Now for alu-minum alloy in LFC process,the main problemsare se…     

Regularization Method to the Parameter Identification of Interfacial Heat Transfer Coefficient and Properties during Casting Solidification

The accurate material physical properties, initial and boundary conditions are indispensable to the numerical simulation in the casting process, and they are related to the simulation accuracy directly. The inverse heat conduction method can be used to identify the mentioned above parameters based on the temperature measurement data. This paper presented a new inverse method according to Tikhonov regularization theory. A regularization functional was established and the regularization parameter was deduced, the Newton-Raphson iteration method was used to solve the equations. One detailed case was solved to identify the thermal conductivity and specific heat of sand mold and interfacial heat transfer coefficient (IHTC) at the meantime. This indicates that the regularization method is very efficient in decreasing the sensitivity to the temperature measurement data, overcoming the ill-posedness of the inverse heat conduction problem (IHCP) and improving the stability and accuracy of the results. As a general inverse method, it can be used to identify not only the material physical properties but also the initial and boundary conditions' parameters.     

Theoretical Analysis of the Solidification of Aluminum Alloy Billet in Air-Slip DC Mold

Based on the heat transfer analysis of Air-Slip DC mold, a numerical model was presented to study the quantitative relationships between critical solidification layer and casting rate, pouring temperature and mold cooling ability etc. The analytical results show that the Air-Slip mold heat transfer condition plays important roles on choices of a casting rate and the pouring temperature, and that the product of billet diameter and casting rate is a certain constant under a certain condition of the mold.     

大跨桥梁悬灌施工组织和设备配套技术研究

结合大跨度桥梁悬臂灌筑法施工实践,研究悬灌施工组织和设备配套的基本技术,通过典型案例分析其应用技术,为合理组织悬灌梁施工提供借鉴经验。