一种高铁CTC进路数据自动测试方法的设计与实现

调度集中系统与计算机联锁接口中的进路数据的测试存在工作量繁重、耗时长以及人为因素易出错等问题,针对该问题提出一种自动测试方法,可有效的解决进路数据的自动测试及测试结果的自动分析,多条高铁线路实践表明,能显著提高调度集中系统与计算机联锁接口的测试效率及数据正确率,使CTC系统产品更安全可靠。     

泰国三机场高铁列控系统方案研究

对泰国三机场高铁项目的列控系统选择要求进行分析,提出列控系统方案并进行综合比选,最后提出泰国三机场高铁项目的列控系统推荐方案,研究成果可以为海外项目列控系统方案选择提供一定的参考。     

ROV attitude control based on multi-motor cooperative propulsion北大核心CSCD

[目的]为了提高遥控水下航行器(ROV)在复杂水下环境中的姿态控制性能,开展多电机协同推进的ROV姿态控制研究。[方法]首先,针对多电机系统的结构和算法,分别提出一种基于PID速度补偿器的偏差耦合结构和一种新型非奇异终端滑模控制(SMC)算法,并设计一种新颖的基于多电机协同推进的ROV姿态控制方法;然后,建立ROV的运动学和动力学模型,开展推进器组推力建模分析、解耦简化ROV动力学模型研究;最后,设计一种ROV滑模姿态控制器。[结果]仿真结果表明,所提的结构和算法可提高多电机系统的抗干扰性、同步性和快速响应能力,进而提高ROV姿态控制系统的稳定性与鲁棒性。[结论]所提方法可为ROV姿态控制提供一种新的可用方案。     

Development and prospects of initial alignment method for strap-down inertial navigation system北大核心CSCD

Initial alignment technology is directly related to the navigation accuracy and startup time of the strap-down inertial navigation system (SINS), and has always been regarded as a challenging focal point in the research field of inertial navigation. This paper makes a comprehensive survey of SINS initial alignment technology, briefly introduces the basic principles of initial alignment without latitude, coarse alignment with known latitude and precise alignment, and points out their advantages, disadvantages and applicable conditions. The research and effects of existing initial alignment error suppression techniques are then analyzed and discussed. Finally, according to the problems of existing initial alignment methods and the development requirements of the carrier, the future research direction of SINS initial alignment technology is predicted. © 2022 Journal of Clinical Hepatology. All rights reserved.     

引水隧洞突涌段变形特征及控制关键技术研究

深埋引水隧洞突泥突水洞段注浆固结圈与初期支护结构作为协同承载结构,其荷载分担与变形控制对结构和施工安全有重要作用。为研究深埋引水隧洞突涌洞段围岩与支护体系稳定性,以滇中引水狮子山隧洞为工程依托,通过现场对围岩-支护监控量测与第二层型钢拱架受力监测,结合施工工况动态分析围岩-支护体系受力与变形,研究总结突涌段施工变形控制关键技术。研究结论:(1)深埋隧洞突涌洞段拱顶累计沉降17.4 mm,达预留值的17%左右;拱肩、拱腰累计收敛106.6 mm、98.1 mm,达预留值100%左右。(2)突涌洞段理论预测极限位移150 mm;现场监测评价设定阈值uo=100 mm,当达到2/3时,应采取加强措施。(3)最佳开挖方法为微台阶法。各级台阶长度控制在3 m左右,按“快挖、快支、快封闭”原则组织施工。(4)超前预支护管棚结构起到提高固结体刚度作用,较固结体提高约13倍。(5)双层支护结构强度、刚度增加,承载能力明显提高,施工安全性也得以提高。     

城市轨道交通甩站开通运营的信号系统实施方案

在城市轨道交通线路开通过程中,如存在受外界条件影响而不能按期开通的地铁车站,需采用甩站的方式进行开通。秉承对原设计方案变更最小化原则,对信号系统的各个子系统实施方案进行研究,以达到满足甩站运营的实际开通需求。     

机车自动驾驶系统模式切换策略研究

受铁路基础装备技术和国内复杂运用环境限制,机车自动驾驶系统仍需在有人值守的情况下工作,所以应有完善的自动驾驶系统模式切换策略来界定值守人员和自动驾驶的权限边界。以机车运行安全为原则,基于列车纵向动力学分析动态切换时列车的平稳性,阐述了机车自动驾驶系统的模式切换策略,该策略已经运用于机车自动驾驶实际应用中。大量实践案例证明,提出的机车自动驾驶模式切换策略能够有效保证机车控制权模式切换过程中列车的安全、平稳运行,取得了良好的运行效果。     

多类型信息下的网络交通流演化模型

交通信息发布机构提供描述信息和规范信息给不同的出行者，描述信息接收者依据信息和经验更新路径行程时间认知，根据认知选择路径；规范信息接收者仅根据经验更新认知.规范信息遵从者选择推荐路径，非遵从者依据认知选择路径.两类信息遵从率都取决于信息准确度.依据非线性动力学理论分析了模型性质，研究表明，模型不动点存在但是不一定唯一，不动点状态与信息混合使用情况有关.数值试验结果表明，模型不动点与随机用户均衡点不同，以恰当比例混合使用两类信息可提高交通流稳定性.     

基于大数据技术的铁路电子支付平台双活中心交易日志处理研究与实现

随着铁路电子支付平台业务的发展和客运12306互联网售票系统售票支付量的大幅提升,支付系统在交易日志和快照环节遇到了性能瓶颈。研究运用Spark、Kafka、HBase等关键技术,基于Hadoop平台和Java开发工具设计数据处理架构,满足高性能和基于双活双中心的交易日志处理。经实际应用,大幅提升了系统处理能力,更好地支撑了铁路业务系统的发展需求。     

Economic and ecological optimization of electric bus charging considering variable electricity prices and CO2eq intensities

In many cities, diesel buses are being replaced by electric buses with the aim of reducing local emissions and thus improving air quality. The protection of the environment and the health of the population is the highest priority of our society. For the transport companies that operate these buses, not only ecological issues but also economic issues are of great importance. Due to the high purchase costs of electric buses compared to conventional buses, operators are forced to use electric vehicles in a targeted manner in order to ensure amortization over the service life of the vehicles. A compromise between ecology and economy must be found in order to both protect the environment and ensure economical operation of the buses.In this study, we present a new methodology for optimizing the vehicles’ charging time as a function of the parameters CO_2eq emissions and electricity costs. Based on recorded driving profiles in daily bus operation, the energy demands of conventional and electric buses are calculated for the passenger transportation in the city of Aachen in 2017. Different charging scenarios are defined to analyze the influence of the temporal variability of CO_2eq intensity and electricity price on the environmental impact and economy of the bus. For every individual day of a year, charging periods with the lowest and highest costs and emissions are identified and recommendations for daily bus operation are made. To enable both the ecological and economical operation of the bus, the parameters of electricity price and CO₂ are weighted differently, and several charging periods are proposed, taking into account the priorities previously set. A sensitivity analysis is carried out to evaluate the influence of selected parameters and to derive recommendations for improving the ecological and economic balance of the battery-powered electric vehicle.In all scenarios, the optimization of the charging period results in energy cost savings of a maximum of 13.6% compared to charging at a fixed electricity price. The savings potential of CO_2eq emissions is similar, at 14.9%. From an economic point of view, charging between 2 a.m. and 4 a.m. results in the lowest energy costs on average. The CO_2eq intensity is also low in this period, but midday charging leads to the largest savings in CO_2eq emissions. From a life cycle perspective, the electric bus is not economically competitive with the conventional bus. However, from an ecological point of view, the electric bus saves on average 37.5% CO_2eq emissions over its service life compared to the diesel bus. The reduction potential is maximized if the electric vehicle exclusively consumes electricity from solar and wind power.