中速三体船型PCC的可行性研究(英文)

In the present paper, a new trimaran Pure Car Carrier (PCC) is proposed and a feasibility study on the ship is carried out. In this study, first, the effective horse power (EHP)/car of the PCC running in still water is predicted. By comparing the predicted EHP/car with that of a conventional mono-hull PCC, it is found that the trimaran PCC is superior to the conventional mono-hull PCC at rather higher speed. As ship speed increases, the reduction of the resistance of the trimaran is bigger. It is also found that at common service speed of PCCs, the EHP/car of a small PCC is lower than that of a conventional PCC. Secondly, the optimal L/B of a main-hull of the trimaran PCC in still water is determined. The optimal L/B of the main-hull varies with ship speed and size because the wave resistance decreases but the frictional resistance increases as L/B of the hull increases. As ship size increases, the optimal L/B of the main-hull of the trimaran PCC decreases.     

Comparison of Microbubble and Air Layer Injection with Porous Media for Drag Reduction on a Self-propelled Barge Ship Model

Ship resistance issues are related to fuel economy, speed, and cost efficiency. Air lubrication is a promising technique for lowering hull frictional resistance as it is supposed to modify the energy in the turbulent boundary layer and thereby reduce hull friction. In this paper, the objective is to identify the optimum type of air lubrication using microbubble drag reduction (MBDR) and air layer drag reduction (ALDR) techniques to reduce the resistance of a 56-m Indonesian self-propelled barge (SPB). A model with the following dimensions was constructed: length L?=?2000 mm, breadth B?=?521.60 mm, and draft T?=?52.50 mm. The ship model was towed using standard towing tank experimental parameters. The speed was varied over the Froude number range 0.11–0.31. The air layer flow rate was varied at 80, 85, and 90 standard liters per minute (SLPM) and the microbubble injection coefficient over the range 0.20–0.60. The results show that the ship model using the air layer had the highest drag reduction up to a maximum of 90%. Based on the characteristics of the SPB, which operates at low speed, the optimum air lubrication type to reduce resistance in this instance is ALDR.     

基于CFD的三体船侧体布局优化

三体船构型复杂,侧体布局对其阻力性能有很大的影响。基于计算流体动力学(Computational Fluid Dynamics, CFD)理论,利用SHIPMDO-WUT软件平台构建一种侧体布局自动优化方法。以某高速三体船为例,进行侧体布局的优化,结果表明:在4个不同弗劳德数下,优化船较母型船的兴波阻力均有所下降,总阻力也相应减小。得出在4个不同弗劳德数下总阻力最小的侧体布局方案,表明该方法的可行性与有效性。研究内容可为三体船减阻优化设计提供参考依据。     

一种具有倾斜侧体的三体船阻力试验研究

作为一种高性能船型,三体船受到了研究人员的广泛关注。由于侧体位置对三体船剩余阻力会产生影响,为了研究倾斜侧体对三体船阻力性能的影响,设计了一种新型的倾斜侧体三体船,并在拖曳水池中开展了相应的船模阻力试验。试验中,针对这种新型的斜侧体三体船,采用船模拖曳的试验方法测量了不同装载情况侧体多个倾斜角度下的三体船裸船体阻力。而后,依据傅汝德假定对试验数据进行了计算,分析并讨论侧体倾斜角度对三体船剩余阻力的影响。试验结果表明,选择侧体合适的倾斜角度有利于降低三体船的航行阻力,为此类船型的设计尤其是快速性方面的研究和设计提供参考。     

三体船模型试验阻力分析

该文在傅汝德数Fr=0.1～1.0范围内进行了三体船静水阻力试验,分析了侧体不同位置对剩余阻力的影响。文中将傅汝德数分成几个小区间,分别讨论了各个区间内最有利于减小剩余阻力的侧体位置,以期能在特定要求航速下选取出最佳的侧体位置,使得三体船的阻力性能有效提高。     

高速三体船阻力性能研究

对中体和侧体均为Wigley船型的高速三体船模在Fr=0.1～0.8时3个横向偏距、5个纵向偏距共15个状态进行了阻力试验,将高速三体船线性兴波阻力理论计算结果与模型试验结果进行了比较,并据模型试验结果分析了横向偏距和纵向偏距对兴波阻力系数的影响,其中各状态的形状因子(1 K)按普鲁哈斯卡法确定,对形状因子与偏距的关系也进行了探讨.     

Ship resistance of quadramaran with various hull position configurations

Multihull ships are widely used for sea transportation, and those with four hulls are known as quadramarans. Hull position configurations of a quadramaran include the diamond, tetra, and slice. In general, multihull vessels traveling at high speeds have better hydrodynamic efficiency than monohull ships. This study aims to identify possible effects of various quadramaran hull position configurations on ship resistance for hull dimensions of 2 m length, 0.21 m breadth, and 0.045 m thickness. We conducted a towing test in which we varied the hull spacing and speed at Fr values between 0.08 and 0.62 and measured the total resistance using a load cell transducer. The experimental results reveal that the lowest total resistance was achieved with a diamond quadramaran configuration at Fr = 0.1-0.6 and an effective interference factor of up to 0.35 with S/L = 3/10 and R/L = 1/2 at Fr = 0.62.     

船行波对直立岸壁的作用研究

以Wigley数学船型为对象,采用传统的一阶Rankine源面元方法,对在浅水情况下的Wigley单体船、双体船以及三体船的艉浪进行数值计算,并用得到的浅水船行波对岸壁的作用力进行计算,结果表明该方法有一定的可行性。     

三体船兴波阻力计算研究

针对高速三体船的兴波阻力,考虑到船舶设计工作中阻力预报的特点,探讨了三体船兴波阻力计算的2种方法。然后将2种算法的计算结果和船模试验结果进行比较分析,得到了一些有意义的结论。结果显示本文方法是行之有效的,2种方法可用于三体船设计的不同阶段。     

三体船型PCC风荷载的实验性研究(英文)

In recent years, demands for car transportation by a ship have been increasing with favorable economic conditions in auto sector, and the need of a pure car carrier (PCC) has grown quickly. A PCC needs huge parking space but smaller displacement since a car is comparatively light for its volume. As a result, almost all PCCs have wide breadth, shallow draft and huge structure above the water surface. These features cause some technical issues of a PCC, like lack of stability, effect of strong winds on its resistance, difficulty of course keeping in rough seas, difficulty of berthing in strong winds, and so on. To overcome these technical issues, one of the authors has proposed a new concept for a PCC. This is a trimaran PCC which has very limited transverse bulkheads in the center hull by using two side hulls as fenders. In the present research, wind forces acting on a scale model of the trimaran PCC were measured in the towing tank with a wind generator at Osaka Prefecture University. Furthermore, in order to clarify the characteristics of wind pressure on the trimaran, height and width of tunnels which are between a main hull and side hulls were changed. And then, in order to imitate a real ship, we used wind reduction technology of corner-cut design for accommodation house of the ship. Moreover, the wind pressure acting on the trimaran was compared with that on a mono-hull PCC. Using these experimental and theoretical results, an estimation method of wind pressure acting on the trimaran PCC is deduced.     

侧体对称性对穿浪三体船阻力性能影响的试验研究（英文）

This paper presented the results of an experimental investigation into the resistance performance of a wave-piercing trimaran with three alternative side hull forms,including asymmetric inboard,asymmetric outboard,and symmetric at various stagger/separation positions.Model tests were carried out at the National Iranian Marine Laboratory(NIMALA) towing tank using a scale model of a trimaran at the Froude numbers from 0.225 to 0.60.Results showed that by moving the side hulls to the forward of the main hull transom,the total resistance coefficient of trimaran decreased.Findings,furthermore,demonstrated that the symmetry shape of the side hull had the best performance on total resistance among three side hull forms.Results of this study are useful for selecting the side hull configuration from the resistance viewpoint.     

三体船侧体位置水动力布局试验研究

利用船模水池试验,考察了对应侧体不同纵横向位置时三体船的阻力性能,分析了随航速的变化,阻力性能较优的三体船方案对应的侧体布局方式,与国内外相关文献发表的三体船的这种侧体布局规律是一致的。     

三体船阻力模型试验

介绍了高速排水型三体船模型静水阻力试验。在Froude数0.3-0.8范围内进行了系列试验，研究侧体位置对阻力的影响，详细分析了三体船各船体之间的兴波干扰、剩余阻力曲线特征和阻力成分。通过阻力换算，对三体船、双体船和单体船的有效功率进行了比较，结果显示出三体船在阻力性能方面的巨大潜力。     

Interference resistance of pentamaran ship model with asymmetric outrigger configurations

An experimental investigation is performed to assess the relation of interference performance on the total resistance of a pentamaran model advancing in calm water. For this motivation, the total drag of the ship is performed for several values of asymmetric outrigger configuration and hull separation, altering the Froude number in the range 0.3–0.9. Our results indicate that remarkable changes in resistance require notable changes in transverse distance values (hull separation) when wave interference may occur. In addition, there is no single configuration that consistently outperforms the other configurations across the entire speed range and the optimum interference factor ?0.2 appears at a Froude number of 0.45 in S/L=0.33 with the outrigger outer position: asymmetric outboard for A3 configuration.     

片体间距对高速三体船水动力性能影响的比较分析(英文)

This paper numerically investigates the influence of separation variation of the outriggers on the hydrodynamic performance of a high speed trimaran (HST) aiming at improving its applicability in diverse realistic disciplines. The present investigation was performed within the framework of the 2-D slender body method (SBM) by calculating the resistance of three symmetric trimaran series moving in a calm free surface of deep water. Each trimaran series comprises of 4681 configurations generated by considering 151 staggers (50%≤α≤+100%), and 31 separations (100%≤β≤400%) for 81 Froude numbers (0.20≤Fn≤1.0). In developing the three trimaran series, Wigley-st, AMECRC-09, and NPL-4a models were used separately for both the main and side hulls of each individual series models. A computer macro named Tri-PL was created using the Visual Basic for Applications. Tri-PL sequentially interfaced Maxsurf then Hullspeed to generate the models of the three trimaran series together with their detailed hydrostatic particulars, followed by their resistance components. The numerical results were partially validated against the available published numerical calculations and experimental results, to benchmark the Tri-PL macro and hence to rely on the analysis outcomes. A graph template was created within the framework of SigmaPlot to visualize the significant results of the Tri-PL properly.     

URANS simulations of catamaran interference in shallow water

This paper investigates the interference effects of wave systems on a multi-hull vessel in shallow water. A numerical analysis is made using the URANS code CFDSHIP-Iowa V.4 on the DELFT Catamaran model 372. The test matrix for numerical computations includes two separation distances (s = 0.17; 0.23) and the depth values of h/T = 8.2, 2.5 and 2, at several speeds ranging within Fr _H = 0.775–1.739. Numerical results are compared with the experimental data of the Bulgarian Ship Hydrodynamic Center, and verification and validation for resistance, sinkage and trim are also performed. Results show that, at critical speed (Fr _H ≈ 1), the presence of a finite depth significantly affects the catamaran total resistance, which, in shallower water, increases considerably with respect to deep water. At low h/T, small effects of the water depth on resistance occur at subcritical and supercritical speeds. The interference effects seem to be more relevant in shallow, rather than in deep water, with maximum IF values registered at critical speeds (Fr _H ≈ 1). Similarly to deep water, the lower the separation distance the greater the interference value. Moreover, in shallow water some negative interference is observed at Fr > 0.5. Wave patterns and wave profiles are analyzed and a comparison is made between several configurations of catamaran and a mono-hull vessel, in order to analyze how water depth and separation distance determine resistance and interference. Finally, a vortex instability study is also included.     

低速肥大型船舶阻力成分分析

以低速肥大型船舶的系列模型试验为依托，分析了船模和实船各阻力分量在不同傅氏９数下随船型参数变化的变化趋势，给出阻力分量随船型变化的平均曲线，结合另外１０型肥大型船舶及３个系列，初步给出了低速肥大型船舶船模和实船各阻力分量占总阻力百分比随傅氏数变化的曲线。     

三体船横摇惯性半径的估算方法研究

三体船的研究与应用极大地推进了高速船舶的发展.对三体船耐波性研究的重要工作内容之一是确定其横摇惯性半径,以计算船舶的横摇周期等.由于三体船的特殊结构,横摇惯性半径的确定方法与单体船型有所不同.在三体梁简化模型的基础上,通过对计算结果的拟合与修正,找到了三体船横摇惯性半径计算的相关参数,得出三体船惯性半径的估算公式,并通...     

高速排水型船舶艉浪数值计算

采用近、远域结合的方法,对高速排水型船舶在深水状态下的NPL单体船、双体船以及三体船的艉浪进行数值计算,计算与试验比较表明该方法是可行性的,初步探讨了深水条件下单体船艉浪的衰减规律。     

三体槽道船船型设计及阻力性能研究

基于原三体风电维护船船型,结合M型船主要特征要素设计改造出三体槽道风电维护船。利用数值仿真技术模拟出M型风电维护船在中高航速下船底槽道的水气两相流变化,并在此基础上进一步探索船体槽道高度、长度的变化位置对船体总阻力的影响,最终确定阻力性能较优的船型方案,从而为海上三体槽道风电维护船船型设计提供参考。