方尾边界条件在高速多体船兴波阻力计算中的应用

将一种由典型的方尾流动物理模型(水流沿方尾下缘切向脱体)导出的数值方尾边界条件应用于高速多体船兴波问题计算。兴波波形与兴波阻力的数值计算采用基于非均匀有理B样条的广义高阶面元法,所得到的高速双体船算例与高速三体船算例的计算结果合理。     

A time-domain higher-order boundary element method for 3D forward-speed radiation and diffraction problems

A time-domain higher-order boundary element method for seakeeping analyses in the framework of linear potential theory is newly developed. Ship waves generated by two modified Wigley models advancing at a constant forward speed in calm water or incident waves and the resultant radiation and diffraction forces are computed to validate this code. A rectangular computational domain moving with the same forward speed as the ship is introduced, in which an artificial damping beach is installed at an outer portion of the free surface except the downstream side for satisfying the radiation condition. The velocity potential on the ship hull and the normal velocity on the free surface are calculated directly by solving the boundary integral equation. An explicit time-marching scheme is employed for updating both kinematic and dynamic free-surface boundary conditions, with an embedding of a second-order upwind difference scheme for the derivative in the x-direction to stabilize the calculation. Extensive results including the exciting forces, added mass and damping coefficients, wave profiles, and wave patterns for blunt Wigley and slender Wigley hulls with forward speed are presented to validate the efficiency of the proposed 3D time-domain approach. The corresponding physical tests of the radiation and diffraction problems in a towing tank are also carried out. Computed numerical results show good agreement with the corresponding experimental data and other numerical solutions.     

On Wavemaking Characteristics of Catamarans and Trimarans

A method for calculating wavemaking resistance of a multihull vessel and corresponding computer program have been developed. The wavemaking characteristics of catamarans and trimarans were analysed based on theoretical calculations. The ranges of Froude numbers at which beneficial and adverse interferences occur, have been indicated and the interference mechanism been preliminarily shown as well.     

Wakes from Large High-Speed Ferries in Confined Coastal Waters: Management Approaches with Examples from New Zealand and Denmark

Large high-speed craft carrying passengers and vehicles produce wake waves that are different from both conventional vessels and smaller fast vessels. Wakes from these high-speed craft can cause environmental problems (such as beach change, ecological disturbance, and damage to structures and archaeological sites) and safety problems (for navigation and for users of the beach and nearshore) in confined waters. As a consequence of the higher speed, the vessel wakes also have a longer period than wakes caused by conventional ships and may lead to substantial wave action in shallow water environments. In both New Zealand and Denmark, issues relating to high-speed craft wakes were not addressed until after the vessels had begun operation, and complex coastal management issues with possibly broader application have had to be addressed. Emerging management strategies have involved regulation using speed and wave height criteria.     

Dynamic interaction of parallel moving ships in close proximity

Nowadays,there are many studies conducted in the field of marine hydrodynamics which focus on two vessels traveling and floating in sufficiently close proximity to experience significant interactions.The hydrodynamic behavior of parallel moving ships in waves is an interesting and important topic of late.A numerical investigation has been carried out for the prediction of wave exciting forces and motion responses of parallel moving ships in regular waves.The numerical solution was based on 3D distribution technique and using the linear wave theory to determine the exciting forces and ship＇s motion.The speed effects have been considered in the Green function for more realistic results.The numerical computations of wave exciting forces and motion responses were carried out for a Mariner and Series 60 for the purpose of discovering different Froude numbers and different separation distances in head sea conditions.Based on the numerical computations,it was revealed that the sway,roll and yaw have a significant effect due to hydrodynamic interaction.     

穿浪双体船兴波阻力数值计算

利用基于面元法的船舶兴波阻力和兴波波形的势流计算方法,将CFD与CAD技术联系在一起,数值计算高速穿浪双体船的兴波阻力与兴波波形。兴波阻力的计算与实船的剩余阻力曲线趋势符合,对实船船型参数的选择和优化有一定的指导意义。     

小水线面双体船波浪载荷水弹性分析

三维水弹性力学将结构分析的有限元方法与围绕柔性体的势流理论结合起来,为在波浪中航行或驻立的复杂结构的运动和内力分析提供了一个流固耦合的统一分析方法,也为小水线面双体船的分析提供了有效的分析工具.文中将水弹性力学方法和谱分析方法相结合,对1 100吨SWATH船进行波浪载荷预报,并将计算结果与水池模型试验数据及国外相关资料进行了对比,说明了水弹性分析方法对于SWATH设计的合理性.     

片体布局对四体船阻力的影响（英文）

Multihull ships are widely used for sea transportation, and those with four hulls are known as quadramarans. Hull position configurations of a quadramaran include the diamond, tetra, and slice. In general, multihull vessels traveling at high speeds have better hydrodynamic efficiency than monohull ships. This study aims to identify possible effects of various quadramaran hull position configurations on ship resistance for hull dimensions of 2 m length, 0.21 m breadth, and 0.045 m thickness. We conducted a towing test in which we varied the hull spacing and speed at Fr values between 0.08 and 0.62 and measured the total resistance using a load cell transducer. The experimental results reveal that the lowest total resistance was achieved with a diamond quadramaran configuration at Fr = 0.1?0.6 and an effective interference factor of up to 0.35 with S/L = 3/10 and R/L = 1/2 at Fr = 0.62.     

Hydrodynamic forces on a two-dimensional multihull structure in waves: application of the scattering matrix theory

The diffraction and radiation problems of a two dimensional multihull structure were investigated by application of the scattering matrix theory. The scattering matrix theory is widely used to analyze wave interaction problems in various scientific fields. The research is focused on the zeros of the wave exciting force near resonance, which occurs both in the diffraction problem and the radiation problem. At the zeros of the wave exciting force, the wave exciting force for the overall structure is zero, but each demihull undergoes wave excitation. At near-resonant frequencies, the amplitude of the traveling wave between adjacent demihulls becomes very large and the demihulls experience very large wave forces. A number of simple equations for representing the hydrodynamic properties of the multihull structure at the zeros and near-resonant frequencies are obtained. Numerical examples show that these simple equations well explain the hydrodynamic forces and the wave system in the spaces between the demihulls.     

基于CFD的高速方尾船粘性阻力预报

随着社会经济的发展和科学技术的进步,人们对船舶航速的要求也日益提高,这引起了世界研究高速船的高潮.而高速船大多具有方尾,这使得方尾船粘性阻力预报的研究十分有意义.利用CFD软件,对文献[4]提供的b系列尾船型进行数值模拟,得到在低傅汝德数下,在不考虑自由液面情况时的摩擦阻力系数,粘压阻力系数以及形状因子,通过计算结果和...     

双体甲板运输船波浪载荷

以某双体甲板运输船为例,使用DNV船级社的SESAM软件对其波浪载荷进行直接计算分析,并对比分析了采用“规范方法”与“直接计算方法”得到的波浪载荷值。结果表明,该双体甲板运输船属于低速排水型船,其波浪载荷的计算方法与高速双体船差别较大,“规范方法”主要适用于高速双体船及尺度较小的低速双体船。对于船长为60m及以上的低速双体船,采用“直接计算方法”更能准确地计算出其波浪载荷。     

Investigation of ship waves in a narrow channel

This paper presents a discussion of the characteristics of ship waves in a narrow channel restricted by vertical walls, based on observed data and the results computed by a 2-D model. In the numerical model, the propagation of waves generated by a moving ship is simulated by solving 2-D depth-integrated Boussinesq equations. To get the boundary conditions at the location of the ship, the slender-ship approximation is employed. A field observation was carried out at a straight length of navigation channel. The ships targeted in the observations are two kinds of waterbuses with lengths of 28 and 24 m. The relative depth Froude number for the river current, an appropriate parameter for assessing the influence of the current on ship wave characteristics in a navigation channel, ranged from 0.47 to 0.76. The observed maximum wave height varied between 0.13 and 1.26 m. The maximum wave height of the wave train is sharply increased when the relative depth Froude number exceeds 0.6. The results computed by the present model agree fairly well with the observed data.     

短波顶浪中KVLCC2船模阻力增加CFD计算研究

波浪中航行船舶阻力增加,特别是短波中的阻力增加,是船舶界关注的焦点之一,也是船舶水动力学界研究的热点之一。论文采用基于RANSE的数值波浪水池技术,针对KVLCC2船型,开展了短波顶浪中船舶阻力增加的数值计算研究。与模型试验结果的比较表明,文中的CFD方法能够相当准确地计算短波顶浪中航行船舶的阻力增加;对船体各部分波浪增阻的分析表明,船体艏段产生的波浪增阻占主导地位,艉段的波浪增阻很小,而平行中体段对波浪增阻几乎无贡献。     

高速排水型船舶方尾条件的数值实现

讨论了高速排水型船舶的方尾条件.给出了方尾条件的若干改进形式,其中一种在数值实现方尾条件时显得更加有效和稳定.采用高阶面元法得到的高速船舶相应的兴波计算数值结果令人鼓舞.     

两圆柱体在波浪载荷作用下的运动响应分析

基于势流理论和波浪辐射/绕射理论,利用水动力分析软件(AQWA)研究两圆柱体在波浪作用下的运动响应特性,给出不同入射角与不同频率规则波作用下,小圆柱体单独运动时的六自由度响应幅值算子(RAOs)及运动响应,并与两个并排圆柱体六自由度响应幅值算子(RAOs)及运动响应作比较。结果表明:大圆柱体的干扰将使小圆柱体的纵摇、横摇、横荡、垂荡运动加剧,对小圆柱体漂移力也有较大影响,但对小圆柱体的纵荡与首摇运动影响不大。计算结果与传统方法计算值相近,证明此软件合理,可为两船在波浪中的干扰模拟计算提供参考。     

分段式尾压浪板对高速船阻力性能的影响

基于CFD技术,以排水型高速船Model 5b为模型,寻求改善高速船阻力性能的尾压浪板新形式。首先尾压浪板新形式的确定在静水条件下进行,然后在波浪条件下验证该压浪板的阻力性能。基于CFD软件建立三维数值波浪水池,静水条件下采用切割体网格技术预报船模的阻力性能。波浪条件下数值水池入口采用直接造波方法,尾部采用人工阻尼消波方法,自由面采用VOF方法处理,采用重叠网格技术预报船模的阻力性能以及运动响应。确定一种比常规压浪板阻力性能优良的分段式压浪板,为船舶节能附体的研究提供参考。     

Ship resistance of quadramaran with various hull position configurations

Multihull ships are widely used for sea transportation, and those with four hulls are known as quadramarans. Hull position configurations of a quadramaran include the diamond, tetra, and slice. In general, multihull vessels traveling at high speeds have better hydrodynamic efficiency than monohull ships. This study aims to identify possible effects of various quadramaran hull position configurations on ship resistance for hull dimensions of 2 m length, 0.21 m breadth, and 0.045 m thickness. We conducted a towing test in which we varied the hull spacing and speed at Fr values between 0.08 and 0.62 and measured the total resistance using a load cell transducer. The experimental results reveal that the lowest total resistance was achieved with a diamond quadramaran configuration at Fr = 0.1-0.6 and an effective interference factor of up to 0.35 with S/L = 3/10 and R/L = 1/2 at Fr = 0.62.     

基于CFD的船舶不同浪向下运动及增阻数值分析

为分析波浪对船舶快速性和耐波性的影响,必须对波浪中航行的船舶阻力增值进行准确预报。本文基于计算流体力学软件FINE/Marine建立了Wigley船模的数值模型,对不同规则波波长下的船体运动和波浪增阻进行了计算,并与试验结果进行对比,验证了数值模型的可行性与准确性。同时计算分析了船舶在规则波中航行时的波浪增阻与浪向之间的变化关系。通过研究发现：随着浪向角的增大船舶波浪增阻逐渐增加,在60°浪向角时波浪增阻达到最大值,浪向角对波浪增阻的影响较大。本文的研究方法可用于船舶有航速下的不同浪向波浪增阻的数值预报。     

半潜式火箭发射平台的水动力性能

本文研究的火箭发射平台主体,为六立柱半潜型式。波高相对于特征长度为小量,考虑到波浪对平台主体大尺度结构的辐射和绕射作用,采用三维频域势流理论对其波浪载荷进行计算分析。对于横撑等小尺度构件,其直径远小于波长,波浪的绕射效应可以被忽略,而粘性作用十分重要,采用了修正的Morison方程对其求解。计算分析结果将为火箭发射平台水动力性能研究提供参考。     

Optimization of bow shape for a non ballast water ship

In this research,a commercial CFD code ＂Fluent＂ was applied to optimization of bulbous bow shape for a non ballast water ships（NBS）.The ship was developed at the Laboratory of the authors in Osaka Prefecture University,Japan.At first,accuracy of the CFD code was validated by comparing the CFD results with experimental results at towing tank of Osaka Prefecture University.In the optimizing process,the resistances acting on ships in calm water and in regular head waves were defined as the object function.Following features of bulbous bow shapes were considered as design parameters： volume of bulbous bow,height of its volume center,angle of bow bottom,and length of bulbous bow.When referring to the computed results given by the CFD like resistance,pressure and wave pattern made by ships in calm water and in waves,an optimal bow shape for ships was discovered by comparing the results in the series of bow shapes.In the computation on waves,the ship is in fully captured condition because shorter waves,λ/Lpp 0.6,are assumed.