共查询到18条相似文献,搜索用时 234 毫秒
1.
针对钢护筒钢筋混凝土组合结构的竖向承载性能,本文进行了系统的轴向受压力学实验。试验采用钢护筒的厚度以及钢筋配筋率作为试验变量,共浇筑6个试件。基于试验结果分析了组合结构的典型破坏特征和破坏模式、钢护筒的约束效应以及钢筋的约束效应对组合结构承载性能的影响。研究结果为钢护筒钢筋混凝土组合结构的设计和应用提供数据基础。 相似文献
2.
针对钢护筒钢筋混凝土组合结构的长期变形特性,本文进行了系统的不同参数试件的徐变特性试验。试验采用钢护筒的厚度以及钢筋配筋率作为试验变量,共浇筑4个试件。基于120d的受压徐变试验结果量化了钢护筒和钢筋的约束效应对组合构件长期变形性能的影响。研究结果为钢护筒钢筋混凝土组合构件长期性能的设计提供数据基础。 相似文献
3.
4.
大尺度钢护筒钢筋混凝土组合构件核心混凝土徐变及其对组合构件力学性能的影响,是这类结构长期工作性能充分发挥的关键。通过设计考虑不同钢护筒厚度和核心混凝土配筋率的3类试件,对试件进行长期单一竖向载荷作用测试,并通过徐变数值换算得到试件不同时刻的徐变系数。试验结果表明,钢护筒-钢筋混凝土构件破坏形式呈现明显延性,试件塑性和韧性能力显著提升,轴向极限承载能力加强;钢护筒厚度的增加可增强对核心混凝土的约束能力,同期应变系数越低;量化了钢护筒和钢筋对核心混凝土的耦合约束效应,为钢护筒-钢管混凝土组合试件长期性能的设计提供数据基础。 相似文献
5.
6.
为了研究钢护筒与内部钢筋混凝土(RCFST)联合受力的机理和破坏模式,以果园港二期工程桩基为原型,开展钢结构与钢筋混凝土结构协同受力机理及其设计优化技术的研究。以钢护筒厚度、配筋率、配箍率为变量,进行RCFST结构短柱轴压试验。根据不同参数构件的试验结果,分析RCFST结构的破坏模式及受力机理。试验结果表明:RCFST短柱结构中,钢护筒与箍筋对核心混凝土均有约束作用,且双重约束效应明显,钢护筒与箍筋对核心混凝土的约束效应可以有效地抑制混凝土裂缝开展,使得钢护筒较传统的钢管混凝土结构具有更高的承载力以及更好的塑性和韧性;在钢护筒具有足够的约束效应时,钢护筒、混凝土及纵筋均在试件破坏时达到屈服,材料性能得以充分利用。 相似文献
7.
8.
9.
针对钢护筒与钢筋混凝土(RCFST)结构轴压受力性能、分布规律及设计方法的问题,以重庆果园港二期桩基为原型,钢护筒厚度、配筋率、配箍率为变量,取长细比4∶1进行RCFST结构短柱轴压试验。考虑钢护筒和箍筋对核心混凝土的双重约束作用,采用剥离分析方法研究RCFST结构的受力机理、应力应变规律及内力分配规律,推导并验证RCFST短柱的轴压承载力公式。该公式基于模型试验分析结果,结合相关规范给出RCFST结构合理径厚比的选择设计方法。结论是:RCFST结构在轴压荷载作用下,处于纵向压力双应力状态,其峰值应力小于钢护筒的屈服应力;基于"统一理论"的轴压承载力计算结果更接近RCFST结构短柱的室内物理模型试验值。 相似文献
10.
对直径2.2 m钢护筒内填钢筋混凝土桩基与纵横向直径1.5 m空心钢管联系撑组成的码头水工结构节点,在大型
通用有限元工具Abaqus二次开发和平行算法的基础上,建立考虑节点局部细化的码头三维数值模型。通过与现场测试对比
验证和大量变动参数的数值分析,得到了核心钢筋混凝土桩基应力、外侧钢护筒应力、纵横联系撑应力、钢筋拉力和破坏
模式等节点力学性状,并分析了最不利荷载工况组合时节点工作机理,随后针对节点的力学性状和“强节点、弱构件”的
原则对节点进行了优化设计。 相似文献
11.
12.
13.
14.
The interfacial bonding performance between seawater sand concrete and basalt fiber reinforced polymer (BFRP) bars were tested under different textile reinforced concrete (TRC) confinement layers, confinement sequences and chloride salt dry-wet cycles. The results show that TRC confinement can change the failure mode of the specimen and improve the ductility of specimens. With the increase of corrosion age, compared with the specimens with the same restrained layers in the conventional environment, the ultimate bond strength of restrained specimens before corrosion gradually decreases, and the slip value when reaching the ultimate bond strength also slightly decreases. The bond strength of the pre-restrained corroded specimens has the same development trend. Based on the bond-slip model of deformed steel bars and concrete proposed by Eligehansen for the first time in 1983—BPE model, under the control of TRC confinement and corrosion age, the relationship between the TRC confinement layer and the ultimate bond strength and slip of seawater sand concrete and BFRP steel bar is established. By fitting and predicting the ultimate bond strength, corresponding slip value, and corrosion age control of different TRC confinement layers, it is found that the confinement effect will not be significantly improved when the confinement layers exceed 4 layers. Under long-term chloride corrosion, the failure mode of the specimen may still change into splitting failure when the number of restrained layers is small. 相似文献
15.
李晓文 李平 林壮College of Shipbuilding Engineering Harbin Engineering University 杨东梅 《船舶与海洋工程学报》2015,(1):39-45
The use of a glass-fiber reinforced composite in marine structures is becoming more common, particularly due to the potential weight savings. The mechanical response of the joint between a glass-fiber reinforced polymer(GRP) superstructure and a steel hull formed is examined and subsequently modified to improve performance through a combined program of modeling and testing. A finite-element model is developed to predict the response of the joint. The model takes into account the contact at the interface between different materials, progressive damage, large deformation theory, and a non-linear stress-strain relationship. To predict the progressive failure, the analysis combines Hashin failure criteria and maximum stress failure criteria. The results show stress response has a great influence on the strength and bearing of the joint. The Balsawood-steel interface is proved to be critical to the mechanical behavior of the joint. Good agreement between experimental results and numerical predictions is observed. 相似文献
16.
17.
18.
通过强度、握裹力、干湿冷热循环、抗氯离子渗透、阳极极化试验等方法,研究了水泥基迁移型钢筋阻锈涂料各种性能。结果表明该涂料涂刷于钢筋表面可有效抑制钢筋腐蚀,并能提高握裹力,对混凝土性能无不利影响。 相似文献